Cookie Press manualv4 1/9/09 12:49 PM Page 7
Assembly Instructions
1Align the arrows on the Cam Disc
with the arrows on the Motor Body (See Figure 1).
2Attach Press Disc to the Cam Disc
by inserting stem of the Cam Shaft into
Assembly Instructions
7Align the long ridges on the inside of the Tube with the outside contours of the assembled 2 Discs. The arrow on
the Tube will line up with the arrow on the Motor Body (See Figure 6). Grasp Tube firmly and turn clockwise until the
Figure 1
the Cam Disc’s center hole. Fit the Shaft all the way inside the unit. Press firmly then turn clockwise. You will hear a click as it snaps in place (See Figure 2).
top arrow on the Tube lines up in the LOCK position. (See Figure 7)
8Your Cookie Press is now fully assembled and ready for use.
3 | The outside contours of the 2 Discs will | ||||
|
|
|
|
| line up (See Figure 3). |
|
|
|
| NOTE: Turn Cam Disc one click counter- | |
|
|
|
| ||
|
|
|
| clockwise if Shaft is difficult to insert into | |
|
|
|
| Motor Body. | |
|
|
|
| 4 | Select a Disc and place it inside the |
|
|
|
| ||
| Figure 2 | Tube Cover. Then place the Tube Cover | |||
|
|
|
|
| onto the Tube, turning clockwise until |
|
|
|
|
| locked (See Figure 4). |
|
|
|
| 5 If a Pastry Tip is to be used, refer to | |
|
|
|
|
| Figure 5 and fit the desired Tip over the |
|
|
|
|
| Pastry Tip Adapter and secure it with |
|
|
|
|
| the Pastry Tip Cover. Place the Pastry |
|
|
|
|
| Tip Assembly inside the Tube Cover. |
|
|
|
|
| Then place the Tube Cover onto the |
| Figure 3 | Tube turning clockwise until locked. | |||
|
|
|
| 6 With a spoon or spatula, load freshly | |
|
|
|
|
| prepared cookie dough or filling. |
|
|
|
| NOTE: To ensure proper operation, do not | |
|
|
|
| fill the Tube past the MAX Fill Line. DO NOT | |
|
|
|
| OVERFILL! | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 4
7
Figure 5
Figure 6
Figure 7
8