Krups KM7000 manual Event of a Problem, Problem Possible Solutions

KM 7005 angl+fran.qxd:KM 7005 franc ais.qxd 12/07/07 9:53 Page 14

English

IN THE EVENT OF A PROBLEM

PROBLEM	POSSIBLE SOLUTIONS
	- Use more ground coffee (see “The ratio” page 9)
	* when using the grinder :
Coffee is very weak	. use medium or strong strength setting
	. be sure the ground coffee supply channel is f ull before
	grinding and brewing
	- Try a darker roast bean.
	- Descale the machine (see “Descaling” page 13)
	- Clean the brew basket and drip stop valve of coffee residue.
Coffee brews too slowly	Also clean the permanent filter if applicable.
(more than 10 minutes)	- Check that there are no issues with the power supp ly.
	- Use a different quality coffee paper.
	- Check that any coffee bean is not clogging the tank bottom.
	- The filter holder must sit down into the brew basket, and the handle
Brew basket will not swivel	click into place.
closed	- Use the handle to seat the filter holder then fold the handle down
	and press until it locks into place.
Problems with programming	- Turn the machine off and unplug it from the power source.
	Wait 1 minute and reconnect.
the Auto-on or the clock.
	This can allow the electronics to reinitialize to factory settings.
The stop-drip does not work	- Clean the valve under running water, manually activating
	the stop-drip.
The coffee-grinder is	- Make sure there is no stone, wood, etc. that may have been
excessively noisy (non-coffee	introduced through your supply of coffee-beans.
objects in the grinding	- Check if, during following preparations, the noise persist.
mechanism).	- Contact the Krups Service Center.
	- Make sure there is no stone, wood, etc. that may have been
	introduced through your supply of coffee-beans.
The grinder is obstructed	- Don’t use caramelized or treated with additives sugar based, coffee
	beans.
	- Don’t use too oily coffee beans.

14