Caring for your Appliance, Defrosting | Hotpoint BM21, BM10 guide

Caring for your Appliance.

DEFROSTING:

AUTOMATIC DEFROSTING OF THE REFRIGERATOR-

There is no need to defrost the refrigerator, because ice deposited on the interior back wall is defrosted automatically.

Ice is deposited on the interior back wall during the compressor operation, later on when the compressor is not operating, the ice defrosts and water droplets collect and drain through the outlet in the interior back wall into the drain pan situated above the compressor, from where it evaporates.

MANUAL DEFROSTING OF THE REFRIGERATOR- As long as the defrost water runs to the chan- nel and through the outlet to the drain pan on the compressor, automatic defrosting of the appliance is assured.

In the case of ice formation on the interior rear wall increasing (3-5mm), ice should be manually defrosted.

Set the thermostat knob to OFF (O) position and leave the refrigerator door open.

Never use electric devices for defrosting and do not scrape the ice with sharp objects. After defrosting is completed, turn the thermostat knob to the desired position and close the refrigerator door.

The cause of increased ice formation may be one of the following:

-The door does not seal well. (Clean the gasket if it is contaminated or replace it if it is damaged).

-The door was frequently opened or was left open for a long period.

-The food stored in the refrigerator was warm.

-Food or packaging is touching the interior rear wall.

MANUAL DEFROSTING OF THE FREEZER- When the frost and ice layer in the freezer is 3 - 5mm thick you should defrost the freezer.

●A few hours before defrosting, set the thermostat to position 7, so that packages are well frozen.

Reset the thermostat to OFF (O) position and disconnect the power supply. Empty the freezer, wrap frozen food in a blanket and put in a cool place.

●Insert the supplied pipe into the groove (the defrost water outlet) in the bottom of the appliance

●Place a vessel underneath to collect the defrost water. Defrosting is accelerated if the door is left open.

●Avoid using defrosting sprays, as they may cause damage to the plastic parts and may be hazardous to health.

REPLACING THE LIGHT BULB-

Should the light fail to work, switch off at the power point and pull out the plug. Remove the shelves to make access easier. Access to the bulb is from the rear of the cover (arrow 1) and remove the cover in the direction of (arrow 2).

Unscrew the old bulb. Screw the new bulb securely into the holder. Replace the plug in the power point and switch on. If the light fails to work, do not worry, it will not affect the working of your Larder Fridge. Obtain a replacement (max 15 watt 220-240V alternating current, E14 lampholder) from your nearest Spares Centre and replace the old bulb.

BM10, BM21 specifications

Hotpoint has established a reputation for delivering reliable and innovative home appliances, and their BM10 and BM21 models of built-in microwaves further solidify this commitment. These two appliances bring modern design features and advanced technology to kitchens, ensuring cooking convenience and versatility.

The Hotpoint BM10 microwave offers a capacity of 17 liters, making it ideal for smaller kitchens or for individuals who value efficiency and space. With a sleek and contemporary design, the BM10 seamlessly integrates into any cabinetry, enhancing the overall aesthetic of your kitchen. Its user-friendly interface features intuitive controls, making it accessible for all users, regardless of cooking skill.

One standout feature of the BM10 is its combination cooking technology, which allows users to utilize both microwave and grill functions simultaneously. This results in evenly cooked meals that boast a delightful crispy texture on the outside, paired with tender juiciness on the inside. The microwave also comes equipped with an automatic cook function, which takes the guesswork out of meal preparation by selecting the optimal cooking times and power levels for various dishes.

On the other hand, the Hotpoint BM21 model offers a larger capacity of 25 liters, catering to families or those who often entertain guests. Like the BM10, the BM21 features a stylish built-in design and is equipped with modern touch controls for ease of use. This microwave also includes a grill function for those who enjoy perfectly browned dishes without the need for a conventional oven.

One exceptional technology featured in both models is the ‘Jet Defrost’ function. This innovation allows for rapid defrosting of frozen food items, ensuring that meal preparation is quick and efficient. Both the BM10 and BM21 also include a range of power levels, giving users precise control over cooking, reheating, and defrosting tasks.

Energy efficiency is another critical consideration in the design of both models. Hotpoint has ensured that these microwaves not only deliver high performance but also contribute to lower energy consumption, ultimately benefiting both users and the environment.

In summary, the Hotpoint BM10 and BM21 microwaves combine modern design with practical functionality. Their features, such as combination cooking technology, flexible power levels, and innovative defrosting capabilities, make them great additions to any kitchen. Whether you’re looking for a compact option or a larger capacity model, Hotpoint provides quality solutions tailored to varied cooking needs.