Whirlpool RH8330, RH8336 18a, Use & Care Information, Care of range hood, Operation of range hood

Page 6

WARNING

Electrical Shock Hazard

Disconnect power before making electrical connections.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death or electrical shock.

to light

groundbulbs wires

 

terminal

 

box

 

connector

 

blower

 

wiring

 

connector

 

black wires

power

white wires

supply

wiring

twist-on

 

connectors

18a.

For models requiring direct wiring:

Connect white wiring from the terminal box, light harness and power supply wiring together with twist-on connector.

Connect black wiring from the terminal box to power supply wiring with twist-on connector.

Connect the power supply ground wire and the green ground wire inside the terminal box under the terminal box ground screw.

Use caulking to seal wire opening. Replace terminal box cover.

For cord connected models:

WARNING

Electrical Shock Hazard

Plug into a grounded 3-prong outlet.

Do not remove ground prong.

Do not use an adapter.

Failure to follow these instructions can result in death, fire, or electrical shock.

For your personal safety, this range hood must be grounded. To minimize possible shock hazard, the cord must be plugged into a mating, 3-prong, ground-type outlet, grounded in accordance with National Electrical Code, ANSI/NFPA 70 – latest edition* and all local codes and ordinances.

If mating outlet is not available, it is the responsibility and obligation of the customer to have a properly grounded, 3- prong outlet installed by a qualified electrician.

Do not use an extension cord.

Using a U.L.-listed power supply cord-connection kit:

Follow Power Cord Kit instructions for connecting wiring.

Replace terminal box cover.

19a.Turn power supply on.

Copies of standards listed may be obtained from:

*National Fire Protection Association Batterymarch Park

Quincy, Massachusetts 02269

Use & Care

Information

Use this range hood only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer. Before installation and before servicing or cleaning range hood, switch off power at service panel and lock service panel to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Operation of range hood

For best results, turn range hood fan on at beginning of cooking and allow it to run until all smoke and odors are removed from room.

To adjust fan speed:

Turn fan speed control to desired setting between “Hi” and “Lo”. Speed may be changed anytime during range hood operation.

To turn range hood light “ON” and “OFF”: Turn light control to operate light “ON” or “OFF”. Light may be turned to “OFF” or “ON” anytime during range hood operation.

“Night” light setting:

Turn light control to “Night” setting when you need the light dimmed for use as a night light.

Care of range hood

Filters:

For best results, remove and clean often.

holes

filters

To remove aluminum filters:

Place finger in hole. Pull back and down.

To clean aluminum filters:

Place filters in dishwasher or hot sudsy water to clean.

To reinstall aluminum filters:

Place edge of filter in channel opening so that side is above flange. Pull back. Press filter into position.

When it's time to replace your aluminum filter:

1.Choose your filter order number. 30" Hood Model RH8330: Order Filter no. 883276

36" Hood Model RH8336: Order Filter no. 883277

2.Call Whirlpool's Telesales line at 1-800-442-9991

3.Give the Telesales Representative the part number needed.

4.The Representative will give you the current price.

5.Place your order using your Master Card ®, Visa ® or Discover ® credit card.

6.If you wish: mail a check or money order to:

Whirlpool Corporation

1900 Whirlpool Drive

LaPorte, IN 46350-9980

Attn: Accessory Accounting

7.Be sure to ask the Telesales Representative about the wide variety of other Whirlpool Product Accessories.

Blower motor:

To clean blower motor:

Clean exterior of motor with a damp cloth and grease-cutting detergent.

Exterior surfaces:

Clean the range hood with a mild detergent and soft cloth. Do Not use abrasive cleaners or steel wool.

Light:

Do Not use bulbs larger than 60 watts in light sockets.

To replace bulbs:

Remove three screws that hold light cover panel in place. Remove panel and set aside. Replace bulb.

Replace light cover panel before operating fan or light.

Light bulbs are not included.

Panel E

Image 6
Contents Installation Instructions and Use and Care Before you start Tools and materials needed for installationProduct dimensions Electrical requirementsVenting requirements Now startVenting through the roof Numbers correspond to stepsPanel C 13a 11a12a Venting through the wallCare of range hood 18aUse & Care Information Operation of range hoodIf range hood does Not operate If you need ServiceWhirlpool Range Hood Warranty If you need Assistance

RH8330, RH8336 specifications

Whirlpool is a brand synonymous with innovation and efficiency in the realm of home appliances, particularly in laundry solutions. Among their noteworthy offerings are the Whirlpool RH8330 and RH8336 models, which stand out for their advanced features and user-friendly technology designed to cater to the modern household.

Both the RH8330 and RH8336 are part of Whirlpool's range of heat pump tumble dryers, combining energy efficiency with superior drying performance. One of the standout features of these models is the A++ energy rating, which ensures that they operate with minimal energy consumption while delivering excellent drying results. This makes them an eco-friendly choice for environmentally conscious consumers.

The Whirlpool RH8330 and RH8336 are equipped with a range of drying programs that cater to various fabric types, ensuring optimal care for your clothes. The programmes include cotton, mixed fabrics, synthetics, and delicate items, allowing users to customize their drying experience based on the load composition. Additionally, these models feature a sensor drying technology, which automatically detects moisture levels in the laundry and adjusts the drying time accordingly. This not only prevents overdrying but also helps save energy and prolongs the lifespan of garments.

In terms of convenience, the models boast a large capacity drum that can handle substantial loads, making them ideal for families or those with frequent laundry needs. The intuitive control panel, complete with a digital display, allows for easy navigation through settings and programs. Furthermore, the delay start feature enables users to schedule their drying cycles at a time that suits them, adding an extra layer of flexibility to laundry routines.

Another notable characteristic of both the RH8330 and RH8336 is their innovative heat pump technology. This system recycles hot air, maintaining a lower temperature during the drying process, which minimizes wear and tear on fabrics. The result is consistently dry laundry that feels fresh and retains its quality over time.

Maintenance is also simplified with these models, thanks to the integrated filter and easy access to the water tank, where condensate is collected. This not only makes cleaning hassle-free but also ensures that the dryer continues to operate at optimal efficiency.

In summary, the Whirlpool RH8330 and RH8336 models combine energy-saving features, advanced drying technology, and user-friendly design, making them excellent investments for anyone looking to enhance their laundry experience while being mindful of energy consumption. With these innovative tumble dryers, Whirlpool continues to set the standard for quality and performance in home appliances.