Hotpoint HZ2022.1 manual Wires in the Mains Lead are Coloured

Page 3
terminal Green and

IMPORTANT:

GB

WIRES IN THE MAINS LEAD ARE COLOURED IN

 

ACCORDANCE WITH THE FOLLOWING CODE...

 

 

Green and Yellow - Earth

Blue- Neutral

Brown- Live

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

- Connect Green and Yellow wire to

marked ‘E’ or or coloured Yellow.

-Connect Brown wire to terminal marked ‘L’ or coloured red or brown.

-Connect Blue wire to terminal marked ‘N’ or coloured Black or Blue.

If a 13amp plug (BS 1363) is used it must be fitted with a 13amp fuse. A 15amp plug must be protected by a 15amp fuse, either in the plug or adaptor or at the distribution board.

If you are in any doubt about the electrical supply to your machine, consult a qualified electrician before use.

CE Marking certifies that this appliance conforms to the following EEC directives :

Low Voltage Equipment - 73/23/EEC & 93/68 EEC Electromagnetic Compatibility 89/336/EEC, 92/31/EEC & 93/68/EEC

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

3

Image 3
Contents Freezer Operating InstructionsPositioning and connection InstallationWires in the Mains Lead are Coloured GB Overall view Description of the applianceUsing the freezer to its full potential Start-up and useStarting the appliance Defrosting the appliance Maintenance and careSwitching the appliance off Cleaning the appliancePrecautions and tips General safetyRespecting and conserving the environment Motor runs continuously TroubleshootingMalfunctions Possible causes / Solutions Green Green indicator light does not illuminateGuarantee Hotpoint Service UK 08448 225UK 08448 24 24 Page 19511279000