Dukane WMIC1 General LED Indicator Guide, Dukane, On / OFF, Wireless Mic and Receiver System

Page 2

8.Attach antenna to the Transmitter , TX.

9.Open back panel on Transmitter and insert the battery.

10.Plug a mic into the 3.5 mm port on the top of the Transmitter.

Antenna

Pg 2 of 2

Port 3.5 mm mini

11.

Turn ON the Transmitter using the top left button. The red led will

 

flash once and the green LED will slowly blink.

 

 

ON / OFF

DUKANE

 

 

12.

Move Transmitter to less than 3 feet from the Receiver.

 

WMIC1-TX

 

 

No Function

 

13.When the Receiver green LED goes off and the Transmitter LED stays on (solid green), the units are paired.

14.Try mic operation. The Transmitter volume may need to be in- creased by using the Vol+ button on the upper right side.

Miniature Microphone

Transmitter - side Buttons

Volume UP (+)

Volume DOWN

General LED Indicator Guide

WMIC1-TX

Transmitter ; Flashing green — Looking for a Receiver

DUKANE

 

Solid green ON — Locked to a Receiver

Flashing red ———-Battery charge low

Receiver ; Flashing green — Looking for a Transmitter

No LED on— Paired to Transmitter or off.

Flashing green means a device is searching for a pairing..

Wireless Mic and Receiver System

 

www.dukane.com/av

Audio Visual Products

Toll-free: 888-245-1966

2900 Dukane Drive

Fax: 630-584-5156

St. Charles, Illinois 60174

E-mail:avsales@dukane.com

Headset MIC Connected to the Transmitter

Your amplifier with speakers

Your projector with speakers

Image 2
Contents Blank , closed port Wireless Mic WMIC1 Quick Start GuideReceiver Connections for a typical Dukane projectorDukane General LED Indicator GuideWireless Mic and Receiver System On / OFF