Installation
! Before operating your new appliance please read
/* | this instruction booklet carefully. It contains |
| |
| important information concerning the safe operation, |
| installation and maintenance of the appliance. |
| ! Please keep these operating instructions for future |
| reference. Pass them on to possible new owners of |
| the appliance. |
Positioning
!Keep packaging material out of the reach of children.
It can become a choking or suffocation hazard. (see Precautions and tips).
!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.
Use the appropriate cabinet to ensure that the appliance functions properly.
•The panels adjacent to the oven must be made of
•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.
•to install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:
Ventilation
To ensure adequate ventilation is provided, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).
. | 45 | mm |
mm |
| |
| . | |
560 |
|
|
Centring and fixing
Position the 4 tabs on the side of the oven, in line with the 4 holes on the outer frame. Adjust the tabs according to the thickness of the cabinet side panel, as shown below:
20 mm thick: take off the removable part of the tab (see diagram).
18 mm thick: use the first groove, which has already been set in the factory (see diagram).
mm.23 | . | mm. |
| mm |
|
| 45 |
|
mm.595 |
|
| mm.567 | 558 | mm. | 593 |
|
|
| ||||
|
|
|
|
|
| |
| 595 |
| 5 mm. |
|
|
|
| mm. | . |
|
|
| |
|
| mm |
|
|
| |
|
|
| 545 |
|
|
|
|
| . |
|
|
|
|
|
| mm |
|
|
|
|
| 24 |
|
|
|
| |
!The appliance must not come into contact with electrical parts once it has been installed.
The indications for consumption given on the data plate have been calculated for this type of installation.
16 mm thick: use the second groove (see diagram).
Secure the appliance to the cabinet by opening the oven door and inserting 4 screws into the 4 holes on the outer frame.
!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.
2