Hotpoint DX 1032 CX manual Manual cooking modes, Automatic cooking modes

Page 11

TheCookingModes inyourOven

 

Your new appliance is equipped with a number of

GB

different cooking modes:

Manual cooking modes

!All cooking modes have a default cooking temperature which may be adjusted manually to a value between 30°C and 250°C for TOP OVEN, between 80°C and 230°C for MAIN OVEN,

(for GRILL mode- from 5% to 100%).

When the temperature in the oven has reached a certain level and

the newly selected temperature is lower than the temperature inside the oven, the text “Hot” appears on the display. However, it will still be possible to start cooking.

Conventional Heating (Top Oven)

-with upper and lower heat. This system is particularly suitable for roasting and baking on one shelf only.

Variable Grilling (Top Oven)

-the oven can also be used for conventional grilling with a full or half width fully controllable grill.

Note: The Top Oven door should be fully open when grilling.

Traditional (Main Oven)

-the upper and rear heating elements are switched on in this position. The traditional oven brings an outstanding level of temperature distribution and reduced consumption. In traditional cooking use only one rack to ensure good heat distribution. By using the various shelf positions available you can balance the quantity of heat between the upper and lower part. If cooking requires more heat from below or above, use the lower or higher shelves respectively.

MULTILEVEL mode (Main Oven)

Since the heat remains constant throughout the oven, the air cooks and browns food in a uniform manner. A maximum of two racks may be used at the same time.

LOW TEMPERATURE modes

This type of cooking can be used for proving, defrosting, preparing yoghurt, heating dishes at the required speed and slow cooking at low temperatures. The temperature options are: 40, 65 and 90.

Automatic cooking modes

The temperature and the cooking duration are pre- set values, guaranteeing a perfect result every time - automatically. These values are set using the

C.O.P.® (Programmed Optimal Cooking) system. The cooking cycle stops automatically and the oven indicates when the dish is cooked. You may start cooking whether the oven has been preheated or not. The cooking duration can be customised according to personal taste by modifying the relevant value - before cooking begins - by ±5/20 minutes depending on the selected programme. The duration can however be modified even once cooking has begun. If the temperature inside the oven is higher than the suggested value for the selected mode, the text “Hot” appears on the display and it will not be possible to begin cooking; wait for the oven to cool.

!When the cooking stage has been reached, the oven buzzer sounds.

!Do not open the oven door as this will disrupt the cooking time and temperature.

BAKED CAKES mode

This function is ideal for cooking desserts which are made using natural yeast, baking powder and desserts which contain no yeast. Place the dish in the oven while it is still cold. The dish may also be placed in a preheated oven.

BREAD mode

Use this function to bake bread. To obtain the best results, we recommend that you carefully observe the instructions below:

follow the recipe;

do not exceed the maximum weight of the dripping pan;

remember to pour 50 g (0,5 dl) of cold water into the baking tray in position 5.

The dough must be left to rise at room temperature for 1 – 1 ½ hours (depending on the room temperature) or until the dough has doubled in size.

The cooking tempereature in this programme can be reduced to 1min.

Recipe for BREAD:

1 Dripping pan holding 1000 g Max, lower level

2 Dripping pans each holding 1000 g Max, medium and lower levels

Recipe for 1000 g of dough: 600 g flour, 360 g water, 11g salt, 25 g fresh yeast (or 2 sachets of powder yeast)

Method:

Mix the flour and salt in a large bowl.

Dilute the yeast in lukewarm water (approximately 35 degrees).

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

11

Image 11
Contents DX 1032 CX Instructions for Installation and UseRetention of this Instruction Book To the InstallerIntroduction To the UserSafetyInformation Never AlwaysInstallation Tall Cabinet Ventilation 595mm Control panel Main parts of your DoubleOvenOverall view Control panel lock Setting the clockSetting the minute minder Start-upanduseStandby Demo modeRestoring the factory settings Automatic cooking modes Manual cooking modesChicken mode Fish modeBeef mode Plum Cake modeProgramming the cooking duration Practical cooking adviceSetting the end time for a cooking mode Programming cookingThis will cause overheating SolarplusGrillUsing the grill pan kit Platewarming in the top oven To use the oven proceed as followsDo not place food or dishes on the floor Oven.GB TopOvenTemperature Charts-Meat TopOvenTemperature Charts-Baking Telescopic runners and Meat pan Cooking temperature rangesMainOven-TheIntelligentCooking System Cooking Advice TableTemperatureConversionChart Base & Rear of Top Oven and Base of Main Oven Care and CleaningHow Stayclean works CleaningInner Door Panels & Glass Control PanelRefit the door inner glass as follows Remove the door inner glass as followsGB There MAY be Nothing Wrong If something Goes wrongDisposal of old electrical appliances Disposal of your productYear Parts Guarantee Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Guarantee does not coverUK 08448 24 24 Republic of Ireland 01 230 Hotpoint ServiceParts & Accessories

DX 1032 CX specifications

The Hotpoint DX 1032 CX is a highly efficient dishwasher designed to meet the needs of modern households. With its blend of advanced technologies and user-friendly features, it stands out as a reliable appliance for effective cleaning and convenience.

One of the standout features of the DX 1032 CX is its impressive energy efficiency. Rated A+++, this dishwasher not only conserves energy but also minimizes water consumption, making it an environmentally friendly option for users. It utilizes innovative technologies that optimize water usage, allowing it to clean effectively without wasting resources.

The interior of the Hotpoint DX 1032 CX is designed to accommodate various dishware sizes and shapes. Its adjustable racks provide flexibility, enabling users to load dishes efficiently, whether it’s large pots and pans or delicate glassware. The height-adjustable top basket is particularly useful, providing additional space when needed.

Hotpoint incorporates its patented technologies, such as the Active Dry System, which ensures that dishes are thoroughly dried after washing. This feature significantly reduces water spots and streaks, leaving your dishes sparkling clean and ready for use. Moreover, the dishwasher employs a five-level wash system that guarantees that each item receives optimal cleaning, regardless of its position in the machine.

The DX 1032 CX comes with multiple wash programs, including a rapid option for those in a hurry. The Eco cycle is particularly noteworthy, as it prioritizes water conservation without compromising on cleaning performance. Additionally, there are dedicated programs for specific items, such as glass and pots, ensuring that each load receives the appropriate care.

Noise levels are a consideration for many consumers, and the Hotpoint DX 1032 CX excels in this area as well. Operating at a quiet 47 dB, it can run without disrupting household activities, allowing users to enjoy their space in peace.

In terms of design, the DX 1032 CX features a sleek, modern exterior that fits seamlessly into any kitchen decor. With its intuitive interface and clear display, navigating through its settings is simple, making it accessible for users of all ages.

Overall, the Hotpoint DX 1032 CX combines efficiency, flexibility, and advanced cleaning capabilities, making it an excellent choice for families and individuals seeking a reliable dishwasher that delivers exceptional performance while being kind to the environment.