Hotpoint SX 896 PX S manual GB Start-up and use, Control panel lock, Setting the clock

Page 6

GB Start-up and use

! When inserting the shelf make sure the backstop is at the rear of the cavity (see image).

!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

!To make the setting process easier, keep the knob in position: this will increase the scrolling speed of the numbers on the display.

!Each setting will automatically be stored in the appliance memory after 10 seconds.

!The touch controls cannot be activated if the user is wearing gloves.

Some models are equipped with a system of hinges which allows the door to close slowly, without the user having to follow the movement through with his/her hand. To use the system correctly, before closing the door:

Open the door fully.

Do not force the closing movement manually.

Control panel lock

!The control panel can be locked while the oven is off, once cooking has started or finished and during programming.

To lock the oven controls, press and hold the button for at least 2 seconds. A buzzer sounds and the display shows

the key symbol “n—O”. The

and

icons, when lit,

indicate lock function activation.

 

 

To deactivate the lock, press and hold the

button again

for at least 2 seconds.

 

 

!When cleaning the appliance, the door lock may be closed accidentally (there is an exposed spring). If this happens, reopen it by turning the door lock upwards (see figure).

KO

OK

Setting the clock

!The clock can only be set when the oven is switched off. If

the oven is in standby mode, pressing thebutton once will display the current time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, thebutton and the digits on the TIME display will flash for 10 seconds.

To set the clock:

1. Press the button.

2. Turn the TIMER knob towards and to adjust the hour value.

3. Once you have reached the correct hour value, press

the button.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock.

If theicon flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

!The minute minder may be set regardless of whether the oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30 seconds or when any active button on the control panel is pressed.

To adjust the timer proceed as follows:

1. Press button .

2. Turn the TIMER knob towards and to adjust the hour value.

3.Once you have reached the desired value, press the button again.

The lit symbol will remind you that the minute minder is on. The DISPLAY will show the countdown.

To cancel the minute minder, press thebutton and use the knob to set the time to 00:00. Press button again.

The icon will switch off to indicate that the minute minder has been disabled.

Starting the oven

1.Switch the control panel on by pressing the button. The appliance buzzer sounds three times (ascending) and all buttons light up in sequence.

2.Select the desired cooking mode by turning the SELECTOR knob. The display shows:

- the temperature associated with the mode, if programming manually;

- “Auto” and the duration alternately, if programming is automatic.

3.Press the button to begin cooking.

4.The oven will begin its preheating phase, the preheating indicators will light up as the temperature rises.

5.When the preheating process has finished, a buzzer sounds and all the preheating indicator lights show that this stage has been completed: the food can then be placed in the oven.

6.During cooking it is always possible to:

-modify the temperature by turning the THERMOSTAT knob (manual modes only);

-set the duration of a cooking mode (see Cooking Modes);

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

6

Image 6
Contents Operating Instructions SX 896L PX SGB Warnings Description of the appliance Overall viewControl panel Display Built-in appliances GB InstallationPositioning VentilationTo the terminal marked see diagram Electrical ConnectionElectrical Connection GB Start-up and use Setting the clockSetting the minute minder Control panel lockStandby Restoring the factory settingsModes Manual cooking modesAutomatic cooking modes Programming cooking Practical cooking adviceSetting the end time for a cooking mode Programming the cooking durationCooking advice table Precautions and tips Maintenance and careSliding rack kit assembly Cleaning the oven doorInspecting the seals Once the automatic cleaning cycle is over Safety devicesProgramming the automatic cleaning end time Before you can open the oven door, you will have to waitGB Troubleshooting Mains or there has been a blackouSelected and the food looks burnt Parts and Accessories Afetr Sales ServiceHotpoint Service Essential Contact InformationGB Guarantee

SX 896 PX S specifications

The Hotpoint SX 896 PX S is a high-performance built-in oven that combines modern design with advanced cooking technologies. Crafted for those who appreciate both aesthetics and functionality, this oven is perfect for creating delicious meals while enhancing the look of your kitchen.

One of the standout features of the Hotpoint SX 896 PX S is its large capacity, allowing users to cook multiple dishes at once or accommodate larger meals with ease. The spacious interior is complemented by a range of cooking settings, including fan-assisted cooking, conventional heating, and grill options. This versatility ensures that every meal can be prepared to perfection, whether you're baking, roasting, or grilling.

The multifunctional design of the Hotpoint SX 896 PX S also incorporates innovative cooking technologies. The Smart Cooking feature allows for precise temperature control, ensuring that food is cooked evenly and retains its moisture and flavor. Additionally, the oven's automatic cooking programs take the guesswork out of meal preparation, delivering optimal results for a variety of recipes.

Another remarkable characteristic of this oven is its energy efficiency. With an A+ energy rating, the Hotpoint SX 896 PX S is designed to minimize power consumption without compromising performance. This not only helps to reduce your energy bills but also makes it an environmentally friendly choice for the modern kitchen.

Cleaning the Hotpoint SX 896 PX S is a breeze, thanks to its innovative cleaning systems. The oven is equipped with a pyrolytic cleaning function, which heats the interior to a high temperature to burn off food residues and spills, turning them into ash that can be easily wiped away. This feature saves time and effort, ensuring that your oven remains spotless with minimal maintenance.

Aesthetically, the Hotpoint SX 896 PX S boasts a sleek stainless steel design that fits seamlessly into any kitchen decor. The user-friendly interface, complete with touch controls and an LED display, enhances the ease of operation.

In summary, the Hotpoint SX 896 PX S is an excellent choice for anyone seeking a reliable and stylish built-in oven. With its large capacity, multifunctional cooking options, energy efficiency, and easy cleaning features, it stands out as a top choice for home chefs and cooking enthusiasts alike.