Installation of the cooker

Installation

The appliance must only be installed by a competent person. In the UK, CORGI registered installers undertake to work to safe and satisfactory standards.

Before moving your cooker check that it is cool, and switch off at the cooker control unit. Movement of your cooker is most easily achieved by lifting the front as follows:

Open the grill door sufficiently to allow a comfortable grip on the underside front edge of the oven roof, avoiding any grill elements.

Note: Take care in moving the cooker as it is heavy. Take care to ensure that any floor covering is not damaged. (FIG. C)

Splashplate optional, apply to Parts Department (see Back Cover for contact number.)

The following instructions should be read by a qualified technician to ensure that the appliance is installed, regulated and technically serviced correctly in compliance with current regulations.

Important: remember to unplug the appliance from the mains before regulating the appliance or carrying out any maintenance work.

Positioning

Important: this unit may be installed and used only in permanently ventilated rooms according to the British

Standards Codes Of Practice: B.S.6172/B.S.5440, Par.2 and B.S.6891 Current Editions.The following requirements must be observed:

a)The cooker should not be installed in a bed sitting room with a volume of less than 20m3. If it is installed in a room of volume less than 5m3 an air vent of effective area of 110cm2 is required, if it is installed in a room of volume between 5m3 and 10m3 a supplementary airvent area of 50cm2 is required, if the volume exceeds 11m3 no airvent is required. However, if the room has a door or a window which opens directly to the outside no air vent is required even when the volume is between 5m3 and 11m3.

b)During prolonged use of the appliance you may consider it necessary to open a window to the outside to improve ventilation.

c)If there are other fuel burning appliances in the same room, B.S.5440 Part 2 Current Edition, should, be consulted to determine the requisite air vent requirements.

For a correct installation of the cooker the following precautions must be followed:

The height of the cooker can be adjusted by means of adjustable feet in the plinth (900mm - 930mm). Adjust the feet by tilting the cooker from the side. Then install the product into position.

NOTE:This appliance must not be fitted on a platform.

The cooker is designed to fit between kitchen cabinets spaced 500mm apart. The space either side need only be sufficient to allow withdrawal of the cooker for servicing. It can be used with cabinets one side or both as well as in a corner setting. It can also be used free-standing.

Adjacent side walls which project above hob level, must not be nearer to the cooker than 150mm and should be protected by heat resistant material. Any overhanging surface or cooker hood should not be nearer than 650mm. (Fig.A)

a)The cooker may be located in a kitchen, a kitonen/diner or bed sitting room, but not in a bathroom or shower room.

b)The hoods must be installed according to the requirements in the hood handbook.

c)The wall in contact with the back of the cooker must be of flameproof material.

d)The cooker is fitted with a safety chain that must be attached to a hook, secured to the wall behind the appliance.

Note: some models can have their gas connection inverted. It is important to make sure the safety chain is always situated on the side which corresponds to the hose holder (Fig. B).

Moving the Cooker

	mm	150 mm
	650	150 mm
	650
	150 mm

Fig. A

Fig. B

Fig. C

GW38X, GW38K, GW38G, GW38P specifications

The Hotpoint GW38 series represents a range of advanced appliances in the world of kitchen technology, showcasing innovative features and stylish designs. The models GW38P, GW38G, GW38K, and GW38X are designed to meet the diverse needs of modern households while ensuring efficiency and reliability.

One of the standout characteristics of the GW38 series is its exceptional cooking performance. Each model is equipped with powerful heating elements that ensure quick and even heating, allowing users to achieve perfect cooking results every time. The precise temperature control enables users to prepare a variety of dishes, from delicate sauces to perfectly roasted meats.

In terms of design, the Hotpoint GW38 series boasts a sleek and contemporary aesthetic. With a variety of color options available, including classic white, stylish graphite, sophisticated black, and modern metallic finishes, the appliances can effortlessly complement any kitchen décor. The user-friendly interface features intuitive controls and a digital display, making it easy to monitor settings and cooking times.

The GW38 series also incorporates advanced cooking technologies aimed at enhancing the user experience. Features like multifunctional cooking options allow users to choose between various cooking methods, including baking, grilling, and steaming. The innovative steam function is particularly noteworthy, as it adds moisture to dishes, resulting in juicier and healthier meals.

Another significant advantage of the GW38 models is their energy efficiency. Designed with sustainability in mind, these appliances consume less energy without compromising performance. This not only helps in reducing the impact on the environment but also contributes to lower utility bills for consumers.

Safety is a paramount concern in kitchen appliances, and the Hotpoint GW38 series addresses this with numerous safety features. Child lock functions, automatic shut-off, and cool-touch surfaces ensure a safe cooking environment, making it suitable for homes with young children.

Moreover, the easy-to-clean interiors and removable components simplify maintenance, allowing users to keep their appliances in top condition effortlessly. This combination of style, performance, and convenience makes the Hotpoint GW38 series a valuable addition to any modern kitchen, meeting both aesthetic desires and practical needs. With the Hotpoint GW38 series, users can enjoy a seamless cooking experience, combining tradition with innovation.