Hotpoint C150 manual Cooker Hoods

Page 19

Installation Instructions

The cooker can be close fitted below hotplate level. This requires a minimum distance of 503mm between cupboard units of hotplate height.

When installing next to a tall cupboard, partition or wall, for a minimum distance of 400mm above hotplate level, allow a side clearance of at least 65mm.

The diagram below illustrates the minimum clearance between the cooker and adjacent walls, cupboards etc.

The wall behind the cooker 150mm below the hotplate and 450mm above, and the width of the cooker, must be a non-combustible material such as ceramic wall tiles.

If the cooker is to be fitted close to a corner on the left hand side, ensure that there is a clearance of at least 50mm to allow the main oven door to open fully for when removing oven shelves.

Cooker Hoods

If a cooker hood is to be installed, refer to the cooker hood

 

manufacturers’ instructions regarding fixing height.

19

Image 19
Contents Instructions for Installation and Use Contents Introduction See ‘Replacing the battery’ in Care and Cleaning sectionAlways For Your SafetyFor Your Safety Never How to Deal with a Fat Fire To Use the Hotplate Safety Requirements for Deep Fat FryingHotplate Grill Pan and Handle GrillTo Use the Grill Relighting the Burner Grill To Use The Oven Relighting the burner OvenOven Meat and Poultry Oven Cooking ChartYeast Mixtures Using the ‘Slow Cook’ Setting for Slow Cooking ‘Slow Cook’ SettingCare and Cleaning Chromium Plating Vitreous EnamelPaint AluminiumDisposal of old electrical appliances ProblemSomething Wrong With Your Cooker Disposal of your productModel Numbers C150G, X153G, L153G Installation InstructionsGeneral Technical Data DimensionCooker Hoods 250 680 500 Unpacking the Cooker Levelling Stability BracketInstallation Instructions Page Extended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteeEssential Contact Information After Sales ServiceHotpoint Service Parts & Accessories