Hotpoint SQ892I manual Electrical Connection, This Appliance Must be Earthed

Page 3

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

_Unscrew the cable clamp screw and the contact screws L-N-$.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green￿ $

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

TABLE OF CHARACTERISTICS

 

width 43.5 cm

Dimensions *

height 32 cm

 

depth 41.5 cm

Volume *

58 l

 

 

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable: 3x1.5mm2

Electrical

voltage: 220 - 240 V~ 50/60Hz

connections

maximum power absorbed 2800 W

 

 

 

Directive 2002/40/EC on the label of

 

electric ovens. Standard EN 50304

ENERGY

Energy consumption for Natural

convection – heating mode:

LABEL *

Traditional mode

 

Declared energy consumption for

 

Forced convection Class – heating

 

mode:

Baking

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

This appliance conforms to the following European Economic Community directives: 73/23/EEC dated 19/02/73 (Low Voltage) and subsequent amendments - 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments. 2002/96/EC

* Without removable guide rails

3

Image 3
Contents Oven Operating InstructionsInstallation This Appliance Must be Earthed Electrical ConnectionDisplay Description ApplianceOverall view Control panelStarting the oven Setting the clockSetting the timer Start-up and useCooking modes Programming cooking Practical cooking adviceCooking advice table Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCleaning the oven door Care and maintenanceSwitching the appliance off Cleaning the applianceAssembling the sliding rack kit After Sales Service After Sales ServiceGuaranteeGB GuaranteePage Page Xerox Business Services

SQ892I specifications

The Hotpoint SQ892I is an advanced built-in smart oven designed to enhance culinary experiences in modern kitchens. Combining elegant design with innovative technology, the SQ892I offers a variety of features tailored for convenience, efficiency, and versatility.

One of the standout characteristics of the SQ892I is its spacious interior, boasting a generous capacity that allows users to cook large meals with ease. This makes it an ideal choice for families or those who enjoy entertaining. The interior is complemented by a high-quality enamel coating, which ensures that cleaning is a breeze and reduces the chances of food residue sticking to the surfaces.

Equipped with cutting-edge cooking technologies, the SQ892I features multiple cooking functions, including conventional cooking, fan-assisted cooking, grill, and even pizza mode. The fan-assisted convection system ensures even heat distribution, resulting in perfectly cooked dishes on every occasion. With settings for baking, grilling, and roasting, users can enjoy professional-level results right from their own kitchens.

The oven also integrates smart cooking technology. With its intuitive control panel, users can easily navigate through various cooking modes and settings. The display is user-friendly, providing clear visibility of temperature settings and cooking times. For those who prefer more hands-off cooking, the SQ892I can be controlled via a smartphone app. This integration allows users to preheat the oven, set timers, and monitor cooking progress from anywhere in the home.

Safety is paramount in the design of the SQ892I. It includes features such as a cooling fan that maintains lower external temperatures, ensuring the oven remains safe to touch during and after use. Additionally, the oven is equipped with an electronic timer that helps prevent overcooking by alerting users when the set time has elapsed.

The elegant design of the Hotpoint SQ892I features a sleek stainless-steel finish that enhances the aesthetics of any kitchen while offering durability and easy maintenance. The combination of style, performance, and smart technology makes the Hotpoint SQ892I an exceptional addition to any culinary enthusiast's home. Whether you’re a seasoned chef or a beginner, the SQ892I is designed to deliver a seamless cooking experience, allowing you to focus on creating wonderful meals for yourself and your loved ones.