Electrical Connection, Electric connection

Electrical Connection

Electric connection

Appliances with a three-pole power supply cable are designed to operate with alternated current at the supply frequency and voltage indicated on the data plate (at the bottom of the oven dashboard). The earthing conductor of the cable is the yellow-green conductor.

Connecting the power supply cable to the mains

The appliance must be directly connected to the mains using an omnipolar circuit-breaker with a minimum contact opening of 3 mm installed between the appliance and the mains, suitable for the load indicated and complying with current directives (the earthing wire must not be interrupted by the circuit-breaker).

The power supply cable must be positioned so that it does not exceed 50°C more than room temperature at any point of its length.

Before making the connection check that:

-the limiter valve and the home system can support the appliance load (see data plate);

-the power supply system has an efficient earthing connection which complies with the provisions of current regulations;

-the socket or omnipoar circuit-breaker is easily accessible once the cooker has been installed.

NOTE: do not use reducers, adaptors or shunts as they could cause overheating and burns.

This appliance conforms to the following EEC Directives:

Low Voltage Equipment 73/23/EEC 93/68/EEC

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width cm.54

depth cm.38

height cm.33

Voltage and frequency of power supply:

230V

50-60Hz

2400W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Energy consumption for Natural convection

heating mode: Convection

Declared energy consumption for Forced convection Class

heating mode: Fan assisted