Hotpoint SE48R1012X Care and maintenance, Switching the appliance off, Cleaning the appliance

Page 13

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

The stainless-steel or enamel-coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap. Use specialised products for the removal of stubborn stains. After cleaning, rinse and dry thoroughly. Do not use abrasive powders or corrosive substances.

The inside of the oven should ideally be cleaned after each use, while it is still lukewarm. Use hot water and detergent, then rinse well and dry with a soft cloth. Do not use abrasive products.

All accessories - with the exception of the sliding racks - can be washed like everyday crockery, and are even dishwasher safe.

We recommend that detergents are not sprayed directly onto the control panel, but that a sponge

is used instead.

￿Never use steam cleaners or pressure cleaners on the appliance.

Inspecting the seals

Check the door seals around the oven regularly. If the seals are damaged, please contact your nearest After-sales Service Centre (see Assistance). We recommend that the oven is not used until the seals have been replaced.

Cleaning the oven door*

Clean the glass part of the oven door using a sponge and a non-abrasive cleaning product, then dry thoroughly with a soft cloth. Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack.

For more thorough cleaning purposes, the external glass panel on the oven door may be removed:

1.loosen the two screws 8 (see figure);

2.remove the glass panel by unhooking it from the handle (see figure);

Replace the glass panel by following the above

sequence in reverse.

GB

 

Replacing the light bulb

 

 

 

 

 

 

To replace the

 

 

 

 

 

 

 

 

 

 

oven light bulb:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.Remove the glass cover using a screwdriver.

2.Remove the light bulb and replace it with a similar one: Wattage 15 W, cap E 14.

Replace the glass cover, making sure the seal is positioned correctly (see diagram).

V

*Only available on certain models.

13

Image 13
Contents Operating Instructions Positioning InstallationPage This Appliance Must be Earthed Electrical ConnectionOverall view of classical-opening model Description ApplianceOverall view of side-opening model Control panelStart-up and use Page Manual cooking modes Cooking modesAutomatic cooking modes Page Programming cooking Practical cooking adviceCooking advice table General safety Precautions and tipsDisposal Respecting and conserving the environmentSwitching the appliance off Care and maintenanceCleaning the appliance Cleaning the oven doorAssistance Sliding rack kit assemblyAfter Sales Service After Sales ServiceGBGuarantee Guarantee

SE481012X, SE48R1012X, SE48L1012X specifications

The Hotpoint SE48L1012X, SE48R1012X, and SE481012X are three models of built-in electric ovens that provide versatility, modern design, and advanced cooking technologies suitable for a variety of cooking enthusiasts. Each model boasts a range of features that enhance cooking performance while maintaining user-friendly operations.

One of the standout features of these ovens is their large capacity, allowing users to cook multiple dishes simultaneously or prepare large meals with ease. With a spacious interior, they offer flexibility for cooking different types of food, from roasts to pastries. The ovens are also equipped with multiple cooking functions, including fan-assisted convection, which ensures even heat distribution for perfect cooking results every time.

The Hotpoint SE series incorporates efficient energy consumption technologies, making them environmentally friendly while also lowering utility bills. The models are designed with insulation to retain heat, contributing to improved energy efficiency without compromising performance.

Ease of use is a primary consideration in these ovens. The intuitive digital control panel includes various preset programs that allow users to select specific cooking settings based on their preferences. The ovens also come with a timer function, enabling precise cooking durations, reducing the risk of overcooking or burning dishes.

Cleaning is simplified with the self-cleaning function. This feature eliminates the need for harsh chemicals and labor-intensive scrubbing, making maintenance easy and convenient. The enamel interior prevents food residue from adhering, ensuring a cleaner oven after each use.

Safety features are also an essential aspect of these Hotpoint ovens. They include automatic shut-off capabilities, which provide peace of mind by ensuring that the oven turns off after a set period or if it detects overheating. Additionally, cool-touch doors help to prevent burns during operation.

Overall, the Hotpoint SE48L1012X, SE48R1012X, and SE481012X ovens not only provide a stylish addition to any kitchen with their sleek designs but also incorporate advanced features that cater to modern cooking needs. With high performance, energy efficiency, and user-friendly technology, they are excellent choices for consumers looking to enhance their culinary experience.