Hotpoint SE1002X manual Electrical Connection, This Appliance Must be Earthed

Page 5

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-6.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green 6

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

Voltage Frequency: 230

V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

4 2 N L

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

DATA PLATE

width cm 37.5

Dimensions height cm 32 depth cm 41.5

Volume

lt. 50

 

 

 

 

 

 

 

Electrical

voltage: 230-240V ~ 50Hz /

maximum power absorbed

connections

2800W-3000W

 

 

 

 

 

 

Directive 2002/40/EC on the label

ENERGY LABEL

of electric ovens.

 

Standard EN 50304

 

 

 

 

 

Energy consumption for Natural

 

convection – heating mode:

Control programs

Convection mode

 

 

 

 

 

 

 

in accordance with

Declared energy consumption for

standard IEC456

Forced convection Class – heating

 

mode:

Baking

This appliance conforms to the following European Economic Community directives:

73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent amendments; 93/68/EEC of 22/07/93 and subsequent amendments.

5

Image 5
Contents Instructions for Installation and Use Oven Operating InstructionsIntroduction Positioning InstallationThis Appliance Must be Earthed Electrical ConnectionControl panel Description of the applianceOverall view Setting the clock and timer Demo modeStart-up and use Control panel lockCooking modes Programming your cooking Practical cooking adviceOven Cooking advice tableGeneral safety Precautions and tipsDisposal Respecting and conserving the environmentSwitching the appliance off Maintenance and careCleaning the appliance Cleaning the oven doorSliding Rack Kit assembly After Sales Service Recycling & Disposal Information GuaranteeKey Contacts After Sales Service

SE1002X specifications

The Hotpoint SE1002X is a versatile and efficient built-in electric oven that combines style and functionality, making it an ideal choice for modern kitchens. This appliance is designed with a sleek stainless-steel finish that not only enhances its aesthetic appeal but also ensures durability and ease of cleaning.

One of the main features of the Hotpoint SE1002X is its spacious 62-liter capacity, allowing users to cook multiple dishes at once or accommodate larger meals for family gatherings. The oven is equipped with multifunction cooking options, including fan-assisted, conventional, and grill modes. This versatility enables users to choose the most suitable cooking method for their dishes, whether it's baking, roasting, or grilling.

The oven also incorporates advanced technologies to ensure optimal cooking results. The "Thermo Flow" technology allows for even heat distribution throughout the oven cavity, ensuring that food is cooked uniformly, while also reducing cooking times. This feature is particularly beneficial for baking, as it helps to achieve perfectly risen cakes and evenly cooked pastries.

Another standout characteristic of the Hotpoint SE1002X is its user-friendly interface. The intuitive control panel features easy-to-read dials and a clear digital display, making it simple for users to choose their desired settings. Additionally, the oven includes a programmable timer, allowing cooks to set precise cooking times and avoid overcooking.

Safety is a priority in the design of the SE1002X, which features a cooling fan that helps to lower the external temperature of the oven door. This is especially important for households with children, as it reduces the risk of accidental burns. Moreover, the oven door is equipped with triple-glazed glass, providing both insulation and visibility into the cooking process.

In terms of energy efficiency, the Hotpoint SE1002X boasts a commendable energy rating, aligning with eco-friendly practices and helping to lower electricity bills. The easy-clean enamel interior adds to the oven's convenience, as it minimizes food residue buildup and simplifies maintenance.

With its combination of innovative features, versatility, and stylish design, the Hotpoint SE1002X stands out as a reliable choice for home cooks seeking to elevate their culinary experiences without compromising on convenience or safety. Whether preparing everyday meals or special occasion feasts, this oven is equipped to meet the demands of any kitchen.