Hotpoint SE481012GX, SE48L1012GX, SE48R1012GX manual

Page 7

- Press the

button to stop cooking.

GB

-Set a new cooking mode (previous settings will be reset).

If a blackout occurs while the oven is already in operation, an automatic system within the appliance will reactivate the cooking mode from where it was interrupted as long as the temperature has not dropped below a certain level. Programmed cooking modes which have not started will not be restored and must be reprogrammed.

￿There is no preheating stage for the BARBECUE mode.

￿Never put objects directly on the bottom of the oven; this will avoid the enamel coating being damaged.

￿Always place cookware on the rack(s) provided.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan generates a stream of air which escapes between the oven control panel and the oven door.

￿Once the cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

When the oven is not in operation, the lamp can be switched on at any time by pressing the button.

7

Image 7
Contents Operating Instructions Positioning InstallationPage This Appliance Must be Earthed Electrical ConnectionControl panel Description ApplianceOverall view of classical-opening model Overall view of side-opening modelStart-up and use Page Manual cooking modes Cooking modesAutomatic cooking modes Page Programming cooking Practical cooking adviceCooking advice table Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCleaning the oven door Care and maintenanceSwitching the appliance off Cleaning the applianceAssistance Sliding rack kit assemblyAfter Sales Service After Sales ServiceGBGuarantee Guarantee