Hotpoint SC52-FC52 manual Electrical Connection, N L

Page 13

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

WARNING:THIS APPLIANCE MUST BE EARTHED.

Mounting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To mount the power supply cable, proceed as follows:

Unscrew the cable clamp screw and the contact screws L-N-6.

Fasten the wires beneath the screwheads using the following colour scheme:Blue (N) Brown (L) Yellow-Green6

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Electrical Connection:

Power cable supply connection to the electrical mains:

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

IMPORTANT:

After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

This appliance conforms to the following EEC Directives:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A

Supply cable: 3x1.5mm2

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

Low Voltage Equipment 73/23/EEC 93/68/EEC

Electromagnetic Compatibility 89/336/EEC

93/68/EEC

Inner dimensions of the oven:

width 43.5cm

depth 40.0cm

height 32.0cm

Inner volume of the oven: 56 lt

Voltage and frequency of power supply:

230-240V~

50Hz

2800-3000W

ENERGY LABEL

Directive 2002/40/EC on the label of electric ovens Norm EN 50304

Models with cooling ventilation:

Energy consumption for Natural convection

heating mode: a Convection

Declared energy consumption for Forced convection Class heating mode: b Fan assisted

13

Image 13
Contents Recipe Book Electric Oven Model SC52-FC52Contents Introduction Close-up view How to use your oven Programming cooking with delayed start How to reset the correct timeOven light Cooling ventilationHow to remove the oven door How to Keep Your Oven in ShapeReplacing the Oven Lamp Practical Cooking Advice Cooking Fish and Meat Cooking PizzaSetting Minutes Convection Weight Cooking rack Preheating time Thermostat SettingSelector knob FanAvoid the following Safety Is a Good Habit To Get IntoIt is a good idea to do the following Instalation Installation of Built-in OvensFastening the oven to the cabinet N L Electrical ConnectionRepair Service and Information Help Desk After Sales ServiceGenuine Parts and AccessoriesUK 08709 077 Extended WarrantiesSatisfaction guaranteed or your money back GuaranteeGuarantee terms and conditions Recycling & Disposal InformationGenuine Parts and Accessories Repair Service and Information DeskKey Contacts

SC52-FC52 specifications

The Hotpoint SC52-FC52 is a versatile and stylish freestanding cooker designed to meet the demands of contemporary kitchens. Combining functionality with user-friendly features, this appliance provides an exceptional cooking experience for both amateur and seasoned chefs alike.

One of the standout characteristics of the Hotpoint SC52-FC52 is its double oven design. This allows users to efficiently prepare multiple dishes simultaneously, thereby saving time during meal preparation. The main oven boasts a generous capacity, which is ideal for cooking large meals or family gatherings. The secondary oven not only provides additional cooking space but also features a grill function, expanding the versatility of the appliance.

Equipped with fan-assisted cooking technology, the Hotpoint SC52-FC52 ensures even heat distribution throughout the cooking cavity. This feature is essential for achieving consistent cooking results, whether baking cakes or roasting meats. The fan also helps reduce cooking times, making it a practical choice for busy households.

The ceramic hob on the Hotpoint SC52-FC52 offers a sleek and modern look while providing a practical cooking surface. With four cooking zones, users can easily accommodate various pots and pans, allowing for multitasking in the kitchen. The smooth surface is easy to clean, making post-meal maintenance less of a chore.

In terms of controls, the Hotpoint SC52-FC52 features straightforward rotary knobs and an easy-to-read LED display. This ensures that users can quickly adjust temperatures and settings without confusion. The appliance also includes an integrated timer, which helps to prevent overcooking and ensures that meals are timed perfectly.

Safety is a paramount consideration in the design of the Hotpoint SC52-FC52. It comes with essential features, such as an ignition system that provides quick and reliable flame ignition, and a failure device that cuts off the gas supply if the flame goes out, offering peace of mind while cooking.

With its attractive finish and modern design, the Hotpoint SC52-FC52 is not only a functional appliance but also a stylish addition to any kitchen. This cooker embodies the perfect blend of innovation, practicality, and safety, making it an excellent choice for those looking to elevate their cooking experience in a contemporary setting. Overall, the Hotpoint SC52-FC52 is a reliable and efficient option for a wide range of culinary endeavors.