Hotpoint ET6124, ET6004, ET7424 manual Advice and recommendations

Page 4

Advice and recommendations

This appliance was designed for non-professional, household use.

Before using the appliance, read the instructions in the owner’s manual carefully since it contains all the instruc- tions you require to ensure safe installation, use and maintenance. Keep this owner’s manual in a safe place for future reference.

When you have removed the packing, check whether the appliance is intact. If you have any doubts, contact a qualified professional before using the appliance.

Never leave the packing components (plastic bags, poly- styrene foam, nails, etc.) within the reach of children since these are a source of potential danger.

The appliance must be installed by a qualified techni- cian in compliance with the instructions provided by the manufacturer.

The latter denies all responsibility for improper installa- tion which may harm persons and animals and damage property.

The electrical safety of this appliance can only be guar- anteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you have any doubts, call in a qualified technician to check the electrical system thoroughly.

The manufacturer denies all responsibility for damage resulting from a system which has not been earthed cor- rectly.

Before powering the appliance, check whether the tech- nical characteristics featured on the appliance data plate correspond with those of the mains electrical system.

Check that the current load of the mains supply and of the power sockets is suitable for the maximum power of the appliance, indicated on the appliance data plate. If in doubt, contact a qualified professional.

This appliance must only be used for the purpose for which it was expressly designed. Any other use (such as heating a room for example) is considered to be im- proper and consequently dangerous.

The manufacturer denies all responsibility for damage resulting from improper or incorrect use of the appliance.

Make sure that the air inlet behind the fan grille is never obstructed. The built-in hob should, in fact, be provided with suitable ventilation for the cooling of the electronic components used in the appliance.

We advise against the installation of an induction hob above an under-the-counter refrigerator (heat) or above a washing machine (vibrations). In fact, there would be insufficient space for the ventilation of electronic components.

Certain fundamental rules must be followed when using electrical appliances. The following are of particular im- portance:

do not touch the appliance with wet or damp hands,

never use the appliance when barefoot,

never use extensions,

never pull on the power supply cable or the appliance itself to unplug it from the mains socket,

never leave the appliance exposed to atmospheric agents (rain, sun, etc.),

do not allow children or persons who are not familiar with the appliance to use it without supervision.

Always unplug the appliance from the mains or switch off the main switch before cleaning or performing any cleaning or maintenance operations.

If the surface of the glass cracks, unplug the appli- ance immediately. For any repairs, contact only an au- thorised after-sales service centre and demand original spare parts. Failure to comply with the above may com- promise the safety of the appliance.

Cut the power supply cable after disconnecting it from the power mains when you decide not to use the appli- ance any longer. Also make all potentially dangerous parts of the appliance safe, above all for children who could play with the appliance.

The glass ceramic hob is resistant to thermal and me- chanical shocks. However, it may break due to a shock caused by a sharp object, such as a tool for exam- ple. In this case, unplug the appliance immediately and contact an authorised after-sales service centre to have it repaired.

Remember that the heating area stays hot for at least half an hour after being turned off; please refrain from placing any cookware or other items on the cooking zone while still hot.

Do not turn on the heating zones if aluminium foil or plastic items have been placed on the hob surface.

Do not go near the heating zones when these are still hot.

If you use small electric appliances near the hob, make sure their power supply cable does not come into con- tact with the hot parts of the hob.

Make sure all pan handles are always pointing inwards towards the centre of the hob to prevent any accidental spills.

First use: the glue used on the hob seals may leave greasy traces on the glass surface. We recommend you wipe these off before using the appliance, with the aid of a non abrasive cleaner. During the first few hours of use, you may detect a smell of rubber, which will disappear quickly.

4

Image 4
Contents Instructions for Installation and Use Electric Hob Model ET7424-ET6004-ET6124Contents Introduction Advice and recommendations Installation Installation and fasteningFastening Electrical connection Cooking zone description Controls Operation Safety devices Overheating protection deviceMaintenance and care Advice on using your applianceStainless steel frame only on some models Hob careAfter Sales Service Repair Service and Information Help DeskGenuine Parts and AccessoriesUK 08709 077 Extended WarrantiesGuarantee Satisfaction guaranteed or your money backGuarantee terms and conditions Recycling & Disposal InformationPage Page Genuine Parts and Accessories Repair Service and Information DeskKey Contacts

ET7424, ET6124, ET6004 specifications

The Hotpoint ET6004, ET6124, and ET7424 are innovative electric cookers designed to elevate your cooking experience while enhancing kitchen efficiency. These models are known for their blend of cutting-edge technology, user-friendly features, and durability.

The Hotpoint ET6004 boasts a stylish design that fits well in any modern kitchen. It features a spacious 60 cm width which allows for ample cooking space. The cooker includes a conventional oven and a separate grill, offering versatility in meal preparation. Its four-zone ceramic hob is designed for rapid heating, allowing for quick meal preparation. Additionally, the ET6004 incorporates a rotary control for easy temperature adjustments, ensuring precise cooking results.

Next in line is the Hotpoint ET6124, which builds upon the features of its predecessor while introducing additional functionalities. It includes a fan-assisted oven, which promotes even heat distribution, ensuring that dishes cook uniformly, whether baking cakes or roasting meats. The ET6124 also features a digital display, making it easier to monitor cooking times and settings. Furthermore, the ceramic hob’s easy-clean surface simplifies maintenance, making it an ideal choice for busy households.

Lastly, the Hotpoint ET7424 takes cooking convenience to the next level with its advanced steam cooking technology. This model helps retain nutrients in food while ensuring that meals are tender and flavorful. The enhanced multi-function oven in the ET7424 allows users to select from various cooking modes, including defrosting and browning, making it versatile for any dish. Its spacious oven capacity means that you can cook larger meals without compromising on quality.

Across these three models, energy efficiency stands out as a key characteristic. Each cooker is designed to minimize energy consumption, contributing to reduced utility bills and a more environmentally friendly kitchen.

In summary, the Hotpoint ET6004, ET6124, and ET7424 offer a range of features tailored to meet the needs of modern cooks. With their stylish designs, user-friendly interfaces, and advanced technologies, these cookers represent a perfect blend of efficiency and performance, ultimately making your cooking experience enjoyable and hassle-free. Whether you opt for the classic features of the ET6004, the enhanced capabilities of the ET6124, or the innovative steam cooking of the ET7424, you will be well-equipped to prepare delicious meals with ease.