Hotpoint ET7424, ET6004, ET6124 manual Installation and fastening, Fastening

Page 5

Installation and fastening

The following instructions are intended for a qualified fitter to guide him/her along the installation, adjustment and tech- nical maintenance procedures as correctly as possible and in full compliance with the applicable norms in force.

Important : unplug the hob before all operations.

Installation

This hob can be built into a worktop simply by cutting out the corresponding slot.

The worktop must be made with a material designed to withstand a temperature of approximately 100°C.

The hob should be positioned at least 40 mm away from the back wall or any other vertical surface in order to allow for correct ventilation and to prevent the surfaces around the appliance from overheating.

If you wish to install the hob on top of an oven, the latter must be fitted with a cooling fan.

Try to avoid installing the hob on top of a dishwasher; if this is unavoidable, place a watertight separating element between the two appliances.

Fastening

Very important: It is vital that you ensure the glass ce- ramic hob is built into a perfectly flat supporting surface. Deformations due to improper fastening could alter the characteristics of the hob and compromise its perform- ance.

The fastening springs are fastened by screws (see dia- gram).

It is vital that these screws be kept accessible at all times.

Insert the hob into the cut-out slot, applying pressure all along the perimeter of the hob frame so that the latter adheres fully to the worktop.

REAR SPRING ASSEMBLY

FRONT OF HOB

KITCHEN

30

 

40

WORKTOP

 

 

 

 

 

 

 

 

 

 

 

 

10 mm

690

48

520

Distance to keep between the cut-out slot and

the cabinet

HOB FROM BELOW

560

+/-

 

 

1

48

750

+/-

 

 

1

 

1

 

-

490

+/

 

785

510

-1 490+/

5

Image 5
Contents Electric Hob Model ET7424-ET6004-ET6124 Instructions for Installation and UseContents Introduction Advice and recommendations Fastening Installation and fasteningInstallation Electrical connection Cooking zone description Controls Operation Overheating protection device Safety devicesAdvice on using your appliance Maintenance and careStainless steel frame only on some models Hob careRepair Service and Information Help Desk After Sales ServiceGenuine Parts and AccessoriesUK 08709 077 Extended WarrantiesSatisfaction guaranteed or your money back GuaranteeGuarantee terms and conditions Recycling & Disposal InformationPage Page Key Contacts Repair Service and Information DeskGenuine Parts and Accessories

ET7424, ET6124, ET6004 specifications

The Hotpoint ET6004, ET6124, and ET7424 are innovative electric cookers designed to elevate your cooking experience while enhancing kitchen efficiency. These models are known for their blend of cutting-edge technology, user-friendly features, and durability.

The Hotpoint ET6004 boasts a stylish design that fits well in any modern kitchen. It features a spacious 60 cm width which allows for ample cooking space. The cooker includes a conventional oven and a separate grill, offering versatility in meal preparation. Its four-zone ceramic hob is designed for rapid heating, allowing for quick meal preparation. Additionally, the ET6004 incorporates a rotary control for easy temperature adjustments, ensuring precise cooking results.

Next in line is the Hotpoint ET6124, which builds upon the features of its predecessor while introducing additional functionalities. It includes a fan-assisted oven, which promotes even heat distribution, ensuring that dishes cook uniformly, whether baking cakes or roasting meats. The ET6124 also features a digital display, making it easier to monitor cooking times and settings. Furthermore, the ceramic hob’s easy-clean surface simplifies maintenance, making it an ideal choice for busy households.

Lastly, the Hotpoint ET7424 takes cooking convenience to the next level with its advanced steam cooking technology. This model helps retain nutrients in food while ensuring that meals are tender and flavorful. The enhanced multi-function oven in the ET7424 allows users to select from various cooking modes, including defrosting and browning, making it versatile for any dish. Its spacious oven capacity means that you can cook larger meals without compromising on quality.

Across these three models, energy efficiency stands out as a key characteristic. Each cooker is designed to minimize energy consumption, contributing to reduced utility bills and a more environmentally friendly kitchen.

In summary, the Hotpoint ET6004, ET6124, and ET7424 offer a range of features tailored to meet the needs of modern cooks. With their stylish designs, user-friendly interfaces, and advanced technologies, these cookers represent a perfect blend of efficiency and performance, ultimately making your cooking experience enjoyable and hassle-free. Whether you opt for the classic features of the ET6004, the enhanced capabilities of the ET6124, or the innovative steam cooking of the ET7424, you will be well-equipped to prepare delicious meals with ease.