Installation, Positioning, Built-in appliance

Installation

		! Before operating your new appliance please read
	GB	! Before operating your new appliance please read
	GB	this instruction booklet carefully. It contains
		important information concerning the safe operation,
		important information concerning the safe operation,
		installation and maintenance of the appliance.
		! Please keep these operating instructions for future
		reference. Pass them on to any new owners of the
		appliance.
		Positioning
		! Keep all packaging material out of the reach of
		children. It may present a choking or suffocation
		hazard (see Precautions and tips).
		! The appliance must be installed by a qualified
		professional in accordance with the instructions
		provided. Incorrect installation may cause harm to
		people and animals or may damage property.

Use a suitable cabinet to ensure that the appliance functions properly.

•The supporting surface must be heat-resistant up to a temperature of approximately 100°C.

•If the appliance is to be installed above an oven, the oven must be equipped with a forced ventilation cooling system.

•Avoid installing the hob above a dishwasher: if this cannot be avoided, place a waterproof separation device between the two appliances.

•Depending on the hob you want to install, the cabinet must have the following dimensions (see figure):

To allow adequate ventilation and to avoid overheating of the surrounding surfaces the hob should be positioned as follows:

•At a minimum distance of 40 mm from the back panel.

•So that a minimum distance of 20 mm is maintained between the installation cavity and the cabinet underneath.

•Kitchen cabinets adjacent to the appliance and taller than the top of the hob must be at least 600

mm from the edge of the hob.

min. 20 mm

mm5 COMPARTMENT

min. 40 mm

min. 20 mm

5 mm

FAN-ASSISTED

FRONT SIDE

OF HOB

UNDERSIDE

OF HOB