Timer, Control panel lock, Demo mode | Hotpoint CIC 642 C specification

	4.	Set the cooking duration using the -and +
GB	4.	Set the cooking duration using the -and +
	buttons.
	buttons.
	5.	Confirm by pressing the	button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A buzzer sounds for approximately 1 minute and the cooking zone switches off when the set programme has finished. Repeat the above procedure for each hotplate you wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display will show the data for the hotplate with the least time remaining, and the light corresponding to the position of the hotplate will flash. The lights corresponding to the other hotplates programmed will be switched on. To visualise the time remaining for the other programmed

hotplates, press the button repeatedly: the time

remaining for each hotplate will be shown sequentially in a clockwise order, starting from the front left hotplate.

Changing the programme

1.Press the button repeatedly until the duration you wish to change is shown.

2.Use the buttons to set the new duration.

3.Confirm by pressing the button.

To cancel a programme, follow the above instructions.

At step 2, press the - button: the duration decreases

progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99 minutes.

1.Press the programming button until the timer

indicator light is illuminated .

2.Set the desired duration using the -and + buttons.

3. Confirm by pressing the button.

The timer begins counting down immediately. When the time has elapsed, a buzzer will sound (for one minute).

Control panel lock

When the hob is switched on, it is possible to lock the oven controls in order to avoid accidental changes being made to the settings (by children, during

cleaning, etc.). Press the button to lock the

control panel: the indicator light above the button will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the button for

a few moments, the indicator light will switch off and the lock function will be removed.

Switching off the hob

Press the button		to switch off the appliance - do not

rely solely on the pan sensor.

If the control panel lock has been activated, the controls will continue to be locked even after the hob is switched on again. In order to switch the hob on again, you must first remove the lock function.

“Demo” mode

It is possible to set the hob to a demonstration mode where all the controls work normally but the heating elements do not switch on. To activate the “demo” mode the hob must be switched on, with all the hotplates switched off.

•Press and hold the + and - buttons

simultaneously for 6 seconds. When the 6 seconds have elapsed, the ON/OFF and CONTROLS

LOCKED indicator lights will flash for one second. Release the + and - buttons and press the button;

•The display will show the text DE and MO and the hob will be switched off.

•When the hob is switched on again it will be set to the “demo” mode.

To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally.

CIC 642 C, CIA 641 C S specifications

The Hotpoint CIA 641 C S and CIC 642 C are modern built-in gas hobs that blend performance, modern aesthetics, and advanced cooking technologies, catering to the needs of contemporary kitchens. These hobs resonate with the essence of contemporary cooking, appealing to both amateur cooks and seasoned chefs.

The CIA 641 C S model boasts a sleek and stylish design, perfect for kitchens that prioritize both form and function. With four gas burners, including a powerful Wok burner, it allows users to manage multiple cooking tasks simultaneously. The innovative design ensures even heat distribution, enhancing cooking efficiency and flavor.

One of the standout features of the CIA 641 C S is its high-efficiency burners, engineered to provide faster boiling times and improved energy efficiency. These burners not only reduce cooking times but also allow for better control over cooking temperatures, making it easier to prepare a variety of dishes.

The CIC 642 C model takes it a step further, offering a slightly larger cooking surface. It comes with five burners, including a dual flame Wok burner that delivers intense heat for stir-frying or quick searing. The additional burner adds versatility to the kitchen, providing more options for meal preparation.

In terms of safety, both models are equipped with advanced flame failure devices. This technology automatically cuts off the gas supply if the flame goes out, providing peace of mind for users and ensuring a safer cooking environment. The easy-to-clean enamel pan supports are designed to simplify maintenance, making clean-up post-cooking quick and hassle-free.

Both hobs feature user-friendly rotary controls, allowing for precision cooking. The controls are designed for intuitive operation, meaning that adjustments to heat settings can be made quickly and effortlessly. This feature is particularly useful for recipes that require precise temperature control.

Incorporating a stylish stainless-steel finish, these hobs enhance the visual appeal of any kitchen, blending seamlessly with various design elements. The combination of sophisticated technology and aesthetic appeal makes the Hotpoint CIA 641 C S and CIC 642 C an excellent choice for anyone looking to upgrade their cooking experience while maintaining a modern kitchen design.