DOOR REVERSAL INSTRUCTIONS
CAUTION
To avoid personal injury to yourself and/or property, we recommend someone assists you during the door reversal process.
1)To access the lower hinge assembly, tilt back the refrigerator cabinet or lay the refrigerator on its back (Fig. A).
2)Remove both leveling legs located at the front of the cabinet.
3)Remove the screws holding the lower hinge assembly to the cabinet (Fig. A).
4)Remove the main door assembly from the refrigerator cabinet (open door and pull down).
5)Remove the screws from the middle hinge assembly. Then remove the hinge and freezer door (Fig. B).
6)Remove (unscrew) the top hinge pin (Fig. C).
7)
8)Remove the door plug and door bushing located on the top and bottom of each door assembly(Fig. B)
9)Interchange positiones (ie. door plug right side, door bushing left side).
10)
11)
12)Make sure the door assembly is properly aligned on the cabinet before tightening the hinge screws.
13)
14)
15)Make sure the door assembly is properly aligned on the cabinet before tightening lower hinge screws.
16)
THE PROCESS IS NOW COMPLETE.
Fig. A
Fig. B
Fig. C
3