Sunbeam SBCR039W important safety instructions Troubleshooting, Problem Possible Cause Solution

TROUBLESHOOTING

Occasionally, a minor problem may arrise, and a service call may not be necessary- use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number for assistance.

Tel: 1-800-263-2629

PROBLEM	POSSIBLE CAUSE	SOLUTION
1) Does not work.	• No power to unit.	• Check connection of
	• Power cord is unplugged.	power cord to power source.
		• Plug in unit.
	• Wrong voltage is being	• Use proper voltage.
	used.
2) Refrigerator runs	• Temperature set too warm.	• Lower temperature
continuously.	• Door is not closed.	control.
		• Close door securely.
	• Hot food inserted.	• Be sure food is at room
	• Door opened too long or	temperature before inserting.
		• Minimize door
	too often.	openings/duration.
	• Close proximity to heat	• Do not place unit close to
	source or direct sunlight.	heat sources or direct
		sunlight.
3) Internal temperature	• No power to unit.	• Check connection of
not cold enough.	• Power cord is unplugged.	power cord to power source.
		• Plug in unit.
	• Temperature control too	• Check setting and increase
	low.	as needed.
	• Door is not closed.	• Close door securely.
	• Hot food inserted.	• Be sure that food is at
	• Door opened too long or	room temperature.
		• Minimize door
	too often.	openings/duration.
	• Air flow obstruction.	• Allow room for air to
	• Wrong voltage is being	circulate around unit.
		• Use proper voltage.
	used.	• Do not place unit close to
	• Close proximity to heat
	source or direct sunlight.	heat sources or direct
		sunlight.

4