Hotpoint DWF50 Levelling, Drain hose connection, Standpipe, SinkWasteSystem, Height Adjustment

Page 6

D ISHWASHER

Installation

Choose where you want to install your dishwasher, you can place it so that its sides or back panel are side by side with furniture or up against the wall. The dishwasher is providedwithwatersupplyanddrain hoses, which can be directed towards the left or right to facilitate appropriateinstallation.

Levelling.

Once the appliance is positioned, adjust the feet by screwing them in or out depending on how high you want it and to level it so that it is horizontal. Make sure that it is not inclinedmorethan2degrees.Ifthe applianceislevel,itwill helpensure its correct operation.

Cold water connection. Connect the cold water supply hose, inserting the small filter supplied with the dishwasher and makingsurethatitisfastenedtightly in place (see figure 2). If the water hoses are new or have been out of use for an extended period of time, let the water run to make sure it is clear and free of impurities before making the connection. If this precaution is not taken, the water inlet could get blocked, causing damage to your dishwasher.

Drain hose connection.

WARNING: Connect your dishwasher drain hose to pipes which connect to the foul drain system and not to surface water drains.

IMPORTANT: For the correct operation of your dishwasher, it is essentialtocomplywiththefollowing information:-

Standpipe:

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with‘retainingflaps’,ensuretheyare insertedfullyintothestandpipe. This will prevent the pipe from jumping outduringinstallationanduse.

SinkWasteSystem:

For under sink drainage:

Before connecting the drain hose, remove any internal restrictions - Thiswillpreventabuildupofdebris which could cause a blockage.

Remove any restrictions from the waste spigot and ensure that the sealingbungisremoved.Thehose should be routed, such that it is raised to a minimum height of 800mm(31/2”).

NOTE: Ensure the sink outlet pipe has a minimum diamtere of 32mm.

Height Adjustment

A

Insert the appliance into the cutout andthenadjusttheheightusingthe screws located on the front bottom part of the machine. Use a screwdriver to turn the screws in the clockwise or anti-clockwise direction to increase or decrease the height respectively.

Fig.2

Anti-flooding protection

Your dishwasher has a special system which stops the water supply in the event of leaks inside theappliance.

It is equipped with a water inlet that hasaclearouterhoseandaninner high pressure hose which turns bright red if it breaks.

Leaks are prevented as the clear outerhosenowcontainsthewater. It is vital that you check it on a regularbasis,ifyouseeithasturned bright red, you know you need to replace it as soon as possible.

Call for an authorised technical engineer to come and replace it.

DONOTpositionthestandpipenear an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in thediagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your householdsink.

It MUST NOT be connected to a surface water drain.

1.Untie the end of the GREY drainage hose from the rear of the appliance.

2.Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

3.If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

4.Attach the GREY drainage hose to the under sink waste disposal unit securely, using the clip and rubber tube supplied.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Instructions for Installation and Use Ishwasher Contents Electrical Connection For your Safety Do not drink any water residues from inside the dishwasherDrain hose connection Height AdjustmentLevelling StandpipeGetting to know your Dishwasher ControlsHow to use your Dishwasher Programme Chart Instructions DescriptionWhen to add salt Before Using your DishwasherTo adjust salt consumption, do as follows Filling the salt containerIf it wont close Cleaner DishesAdding detergent Softer WaterLoading your Dishwasher Information for Test Labs 30 grCleaning the Water Inlet Filter Care and CleaningCleaning the spray arms Unplug the applianceTroubleshooting Resolving minor problems yourselfIshwasher Ishwasher Repair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Extended Warranties Satisfaction guaranteed or your money back Guarantee terms and conditionsJune 2003 Part no. FP198 Repair Service and Information DeskGenuine Parts and Accessories 195039366.00

DWM55, DWF50 specifications

The Hotpoint DWF50 and DWM55 are two of the most popular appliance models from Hotpoint, designed to offer reliable and efficient performance in domestic settings. Each model has distinct features and technologies that meet various consumer needs while ensuring convenience in daily chores.

The Hotpoint DWF50 is primarily a dishwasher model known for its energy efficiency and effective cleaning capabilities. It boasts an A++ energy rating, which not only highlights its eco-friendliness but also helps users save on energy bills. The DWF50 features multiple wash programs, allowing users to choose the one that best suits their dishwashing requirements—from intensive cleaning cycles for heavily soiled pots and pans to quick washes for lightly soiled dishes. The model is equipped with a Half Load option, meaning users can run the dishwasher even when it is not full, saving both water and power.

Additionally, the DWF50 comes with a delay timer, enabling users to set the machine to start its cycle at a more convenient time, such as during off-peak energy hours. The adjustable top basket adds to its flexibility, allowing for the accommodation of taller items without compromising the loading space in the lower basket. With a sleek design and user-friendly interface, the DWF50 integrates seamlessly into modern kitchens.

On the other hand, the Hotpoint DWM55 is a washing machine that combines functionality with cutting-edge technology. The DWM55 also carries an A+++ energy rating, signifying its excellent energy performance. One of its standout features is the Anti-Stain technology, which effectively removes stubborn stains without the need for pre-soaking, thereby saving time and effort.

This washing machine includes a variety of washing programs tailored to different types of fabrics and soil levels. The Quick Wash option provides a solution for when time is of the essence, allowing users to clean lightly soiled garments in under 30 minutes. The DWM55 is also equipped with a large 7 kg washing capacity, making it suitable for medium-sized families.

Both the DWF50 and DWM55 prioritize user-friendly operation, featuring clear settings and easy-to-read displays. Their sleek designs and efficient technologies make them valuable additions to any household, delivering reliability and performance in everyday laundry and dishwashing tasks. With these models, Hotpoint continues to uphold its reputation for producing high-quality home appliances.
Top Page Image Contents