Hotpoint DWF50, DWM55 manual How to use your Dishwasher

Page 8

D ISHWASHER

How to use your Dishwasher

First of all.

Modifying a wash cycle in

- Turn on the water supply

progress.

tap completely.

Ifyouhavechosenthewrongcycle

- Add the correct amount of

- You can modify the wash cycle in

detergent.

progress, if it has only just started.

- Load the baskets correctly.

KeeptheResetbutton"R"pressed

- Check that the spray arms

in for approximately 5 seconds, a

rotate freely.

prolongedbeepwillsound,followed

- Close the door securely.

by three short beeps.

 

Indicatorlight"G"willgoouttoshow

 

all the settings will have been can-

- Press the ON-OFF button "A":

celled. You are now free to re-set

you will hear a short beep and indi-

the correct wash cycle.

cator light "B" comes on.

You've left out a dish?

Yourapplianceisnowonandawait-

inginstructions.

Interrupt the wash cycle by press-

 

ing the On-Off button "A", then

Select the wash cycle.

insert the dish you had forgotten.

Select the wash cycle by pressing

When you shut the door, press the

button "P". Each time this button is

On-Off button again. The cycle will

pressed,abeepwillsoundandindi-

startupfromwhereyouinterrupted

cator lights “E” will come on in

it.

sequence.Select the wash cycle

Cycle end

most suitable for the type of dishes

to wash (see ‘Programme Chart’).

The end of the wash cycle is indi-

Close the door and press the Start

cated by 2 short beeps and the

button after a few seconds, you will

flashing ofthedryingphaseindica-

hearashortbeepandthewashcy-

torlight.

cle will started.

Turn the appliance off by pressing

 

the On-Off button “A”, thus switch-

The dishwasher informs

ing off the electricity supply.

you.

Turn off the water tap.

Yourdishwasherhasindicatorlights

Wait a few minutes before unload-

"G" which light up to indicate the

ing the dishes: they are very hot! If

washcyclephasethatisunderway.

youwaitalittlewhile,theydrybetter

 

due to the steam.

 

Empty the lower basket first.

 

There's been a power

 

failure or you opened the

 

dishwasher door

 

The wash cycle stops and then

 

restarts when the electricity comes

 

backonorwhenyouclosethedoor.

Delaying the start of a programme.

Whenyouhaveloadedthedishes, youcanchoosewhentostartyour dishwasherbeforesettingthewash cycledesired.

Pressbutton"D"todelaythestart of the wash cycle by 12, 9, 6 or 3 hours.Eachtimeyoupressit,you willhearashortbeepandindicator light "G" corresponding to the selecteddelaywillcomeon.

Selectthedesiredwashcycle. PresstheStartbutton,youhearthe beep,thecountdowntothedelayed startwillbegin.

If, for example, you have set a 12 hourdelay,onceyouhaveselected awashcyclethe12hourindicator lightwillflash...followedbytheothers insequenceuntilthesettimedelay isup.Theindicatorlightswillkeep you informed of the countdown progressatalltimes.

Oncethistimeisup,indicatorlight "G"willstopflashingandthewash cyclewillbegin.

If you change your mind and you wishtosetadifferentdelay,justopen thedoor,pressbutton"D",youneed notresetthewashcycle.

Ifyouwanttocancelthedelayset andyouwishtostartthewashcycle immediately, press button "D" repeatedlyuntilthecyclestartsand indicatorlight"G"correspondingto thecyclestartphasecomeson.

Cycle phase and delayed start indicator light "G"

(1)Flashing to indicate a delayedstart,toremindyouthatyou have set a delayed start.

(2)On,litconstantly,eachlight shows which stage of the wash cycle is in progress.

Half load.

Yourdishwasheralsoallowsyouto wash half a load, to save water , electricityanddetergent(useonly halftheamount).

Beforesettingawashcycle,press button "F", indicator light "H" will comeon.

NOTE:Whensetthedishwasher willwashontheupperbasketonly.

To see the settings you have selected

At any time, when the cycle is underway,ifyoupressbutton"F", thecycleinprogressindicatorlight will light up for a few seconds...

followedbythehalfloadindicatorlight ifset.

For your own safety, ensure the door is closed when the dishwasher is not in use.

8

Image 8
Contents Instructions for Installation and Use Ishwasher Contents Electrical Connection For your Safety Do not drink any water residues from inside the dishwasherHeight Adjustment LevellingDrain hose connection StandpipeGetting to know your Dishwasher ControlsHow to use your Dishwasher Programme Chart Instructions DescriptionBefore Using your Dishwasher To adjust salt consumption, do as followsWhen to add salt Filling the salt containerCleaner Dishes Adding detergentIf it wont close Softer WaterLoading your Dishwasher Information for Test Labs 30 grCare and Cleaning Cleaning the spray armsCleaning the Water Inlet Filter Unplug the applianceTroubleshooting Resolving minor problems yourselfIshwasher Ishwasher Extended Warranties Repair Service and Information Help DeskGenuine Parts and AccessoriesUK 08709 077 Satisfaction guaranteed or your money back Guarantee terms and conditionsRepair Service and Information Desk Genuine Parts and AccessoriesJune 2003 Part no. FP198 195039366.00

DWM55, DWF50 specifications

The Hotpoint DWF50 and DWM55 are two of the most popular appliance models from Hotpoint, designed to offer reliable and efficient performance in domestic settings. Each model has distinct features and technologies that meet various consumer needs while ensuring convenience in daily chores.

The Hotpoint DWF50 is primarily a dishwasher model known for its energy efficiency and effective cleaning capabilities. It boasts an A++ energy rating, which not only highlights its eco-friendliness but also helps users save on energy bills. The DWF50 features multiple wash programs, allowing users to choose the one that best suits their dishwashing requirements—from intensive cleaning cycles for heavily soiled pots and pans to quick washes for lightly soiled dishes. The model is equipped with a Half Load option, meaning users can run the dishwasher even when it is not full, saving both water and power.

Additionally, the DWF50 comes with a delay timer, enabling users to set the machine to start its cycle at a more convenient time, such as during off-peak energy hours. The adjustable top basket adds to its flexibility, allowing for the accommodation of taller items without compromising the loading space in the lower basket. With a sleek design and user-friendly interface, the DWF50 integrates seamlessly into modern kitchens.

On the other hand, the Hotpoint DWM55 is a washing machine that combines functionality with cutting-edge technology. The DWM55 also carries an A+++ energy rating, signifying its excellent energy performance. One of its standout features is the Anti-Stain technology, which effectively removes stubborn stains without the need for pre-soaking, thereby saving time and effort.

This washing machine includes a variety of washing programs tailored to different types of fabrics and soil levels. The Quick Wash option provides a solution for when time is of the essence, allowing users to clean lightly soiled garments in under 30 minutes. The DWM55 is also equipped with a large 7 kg washing capacity, making it suitable for medium-sized families.

Both the DWF50 and DWM55 prioritize user-friendly operation, featuring clear settings and easy-to-read displays. Their sleek designs and efficient technologies make them valuable additions to any household, delivering reliability and performance in everyday laundry and dishwashing tasks. With these models, Hotpoint continues to uphold its reputation for producing high-quality home appliances.