Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•Reposition the ‘Hooked End Support’ as required along the GREY drainage hose.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

Dishwasher, LFT 2284 specifications

The Hotpoint LFT 2284 is an advanced, sleek dishwasher designed to enhance your kitchen experience with its efficiency and cutting-edge features. Built with the modern household in mind, this appliance stands out due to its user-friendly design, effective cleaning performance, and energy-saving technology.

One of the main features of the Hotpoint LFT 2284 is its impressive capacity. With multiple adjustable racks, this dishwasher can easily accommodate large loads, making it perfect for families and entertaining guests. The interior includes specialized compartments for cutlery and delicate items, ensuring that every piece comes out sparkling clean without damage.

The LFT 2284 is equipped with Hotpoint's innovative ActiveDry technology, which ensures thorough drying after the wash cycle. This feature utilizes natural airflow for better drying results, reducing the need for additional drying cycles, and saving energy. The dishwasher also offers an Eco Wash cycle, designed to save both energy and water, making it an environmentally friendly choice for conscious consumers.

In terms of cleaning performance, the Hotpoint LFT 2284 stands out with its multiple washing programs. From intensive cycles for heavily soiled pots and pans to quick wash options for lightly soiled dishes, this dishwasher adapts to various needs effortlessly. The adjustable wash arms ensure water reaches every corner, delivering excellent results across a variety of load types.

Noise levels are another consideration in today’s appliances, and the LFT 2284 operates at a remarkably quiet level, allowing users to run it at any time without disrupting the household. Its sleek design fits seamlessly into any kitchen aesthetic, with a simple control panel that is easy to navigate.

Reliability comes with the Hotpoint name, and the LFT 2284 is no exception. It features a durable build quality and thoughtful design that prioritizes user convenience and longevity. With a perfect balance of functionality and energy efficiency, the Hotpoint LFT 2284 is an exceptional choice for anyone seeking a reliable and effective dishwasher, making dishwashing a simple and hassle-free task. Whether it’s a regular family meal or a gathering of friends, this dishwasher is ready to handle it all with sophistication and style.