Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and when
	performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control
	panel may be cleaned using a non-abrasive cloth which
	has been dampened with water. Do not use solvents or
	abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a little
	vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order to
	avoid moisture from forming and being trapped inside
	the machine.
•	Clean the seals around the door and detergent
	dispensers regularly using a damp sponge. This will
	avoid food becoming trapped in the seals, which is the
	main cause behind the formation of unpleasant odours.
Cleaning the sprayer arms
Food residue may become encrusted onto the sprayer arms

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

and block the holes used to spray the water. It is therefore

recommended that the arms are checked from time to time

and cleaned with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer arm,

rotate the locking ring in an anti-

clockwise direction.

The upper sprayer arm should be

replaced with the holes facing

upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

	B
2	C
2

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

*Only available in selected models.

After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

Leaving the machine unused for extended periods

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

Dishwasher, LFT 2284 specifications

The Hotpoint LFT 2284 is an advanced, sleek dishwasher designed to enhance your kitchen experience with its efficiency and cutting-edge features. Built with the modern household in mind, this appliance stands out due to its user-friendly design, effective cleaning performance, and energy-saving technology.

One of the main features of the Hotpoint LFT 2284 is its impressive capacity. With multiple adjustable racks, this dishwasher can easily accommodate large loads, making it perfect for families and entertaining guests. The interior includes specialized compartments for cutlery and delicate items, ensuring that every piece comes out sparkling clean without damage.

The LFT 2284 is equipped with Hotpoint's innovative ActiveDry technology, which ensures thorough drying after the wash cycle. This feature utilizes natural airflow for better drying results, reducing the need for additional drying cycles, and saving energy. The dishwasher also offers an Eco Wash cycle, designed to save both energy and water, making it an environmentally friendly choice for conscious consumers.

In terms of cleaning performance, the Hotpoint LFT 2284 stands out with its multiple washing programs. From intensive cycles for heavily soiled pots and pans to quick wash options for lightly soiled dishes, this dishwasher adapts to various needs effortlessly. The adjustable wash arms ensure water reaches every corner, delivering excellent results across a variety of load types.

Noise levels are another consideration in today’s appliances, and the LFT 2284 operates at a remarkably quiet level, allowing users to run it at any time without disrupting the household. Its sleek design fits seamlessly into any kitchen aesthetic, with a simple control panel that is easy to navigate.

Reliability comes with the Hotpoint name, and the LFT 2284 is no exception. It features a durable build quality and thoughtful design that prioritizes user convenience and longevity. With a perfect balance of functionality and energy efficiency, the Hotpoint LFT 2284 is an exceptional choice for anyone seeking a reliable and effective dishwasher, making dishwashing a simple and hassle-free task. Whether it’s a regular family meal or a gathering of friends, this dishwasher is ready to handle it all with sophistication and style.