Hotpoint FDUD 44110 ULTIMA manual Troubleshooting, Problem Possible causes / Solutions

Page 15

Troubleshooting

Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance.

GB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Problem:

Possible causes / Solutions:

 

 

The dishwasher does not start or cannot be

• Switch off the appliance by pressing the ON/OFF button, switch it back

 

 

 

controlled.

on after approximately one minute and reset the cycle.

 

 

 

 

• The appliance has not been plugged in properly.

 

 

 

 

• The dishwasher door has not been shut properly.

 

 

 

The door won’t close.

• The lock was released. Strongly push the door until a “clacking” noise is

 

 

 

heard.

 

 

 

No water drains from the

• The dishwasher cycle has not yet finished.

 

 

 

dishwasher.

• The water drain hose is bent (see Installation.)

 

 

 

 

• The drain duct is blocked.

 

 

 

 

• The filter is clogged up with food residues.

 

 

 

The dishwasher makes excessive

• The dishes are rattling against each other or against the sprayer arms.

 

 

 

noise.

• An excessive amount of foam has been produced: the detergent has not

 

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

 

(see Start-up and use.)

 

 

 

The dishes and glasses are covered

• The level of refined salt is low or the dosage setting is not suitable for

 

 

 

in a white film or limescale deposits.

the hardness of the water (see Rinse aid and salt.)

 

 

 

• The lid on the salt dispenser is not closed properly.

 

 

 

 

• The rinse aid has been used up or the dosage is too low.

 

 

 

The dishes and glasses are streaked

• The rinse aid dosage is too high.

 

 

 

or have a bluish tinge.

 

 

 

 

The crockery has not been dried

• A wash cycle without a drying cycle has been selected.

 

 

 

properly.

• The rinse aid has been used up or the dosage is too low (see Rinse aid

 

 

 

 

and salt.)

 

 

 

 

• The rinse aid setting is not suitable.

 

 

 

 

• The crockery is made from non-stick material or plastic.

 

 

 

The crockery is not clean.

• The racks are overloaded (see Loading the racks.)

 

 

 

 

• The crockery has not been arranged well.

 

 

 

 

• The sprayer arms cannot rotate freely.

 

 

 

 

• The wash cycle is too gentle (see Wash cycles.)

 

 

 

 

• An excessive amount of foam has been produced: the detergent has not

 

 

 

 

been measured out correctly or it is not suitable for use in dishwashers

 

 

 

 

(see Start-up and use.)

 

 

 

 

• The lid on the rinse aid compartment has not been shut correctly.

 

 

 

 

• The filter is dirty or blocked (see Care and maintenance.)

 

 

 

 

• The refined salt level is low (see Rinse aid and salt.)

 

 

 

The dishwasher does not take any

• There is no water in the mains supply.

 

 

 

water in - Tap shut-off alarm (short

• The water inlet hose is bent (see Installation.)

 

 

 

beeps are heard)*

• Turn on the tap and the appliance will start after a few minutes.

 

 

 

(the ON/OFF indicator light flashes,

• The appliance lock has been activated because no action was taken

 

 

 

when the beeps sounded.

 

 

 

the “Tap shut-off” symbol is lit

 

 

 

Switch off the machine using the ON/OFF button, turn on the tap and

 

 

 

and the display shows the text:

switch the machine back on after a few seconds by pressing the same

 

 

 

No water. Turn tap on. After a few

button. Re-program the appliance and restart the wash cycle.

 

 

 

seconds F 06 appears.)

 

 

 

 

Water inlet hose alarm / Water inlet

• Switch off the appliance by pressing the ON/OFF button. Shut off the

 

 

 

filter blocked

water tap to eliminate the risk of flooding and remove the plug from the

 

 

 

(the ON/OFF indicator light flashes, the

electrical socket.

 

 

 

Make sure the water inlet filter has not become blocked by impurities

 

 

 

“Filter” symbol is lit and the display shows

 

 

 

(see “Care and maintenance” chapter.)

 

 

 

the textF 07.)

 

 

 

 

 

 

*Only available in selected models.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions for use ContentsSaving energy and respecting the environment Precautions and safety adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Installation Positioning and levellingElectrical Connection Anti-condensation strip Connecting the water suppliesConnecting the water inlet hose Sink Waste SystemAnti-flooding protection Advice regarding the first wash cycleSettings button Child safety lockDescription of the appliance Control PanelDisplay Upper rack Loading the racksLower rack Cutlery basketUnsuitable crockery Adjusting the height of the upper rackTip-up compartments with adjustable position Cutlery trayStart-up and use Starting the dishwasherMeasuring out the detergent Detergent dosage Wash cyclesWash options Special wash cycles and OptionsMeasuring out the rinse aid Rinse-aid dispenser settingSetting the water hardness Rinse aid and refined saltCare and maintenance Problem Possible causes / Solutions TroubleshootingEssential Contact Information After Sales ServiceAfter Sales Service Parts and AccessoriesExtended Guarantees GuaranteeMonths Parts and Labour Guarantee Year Parts GuaranteePage Page 195111617.01

FDUD 44110 ULTIMA specifications

The Hotpoint FDUD 44110 ULTIMA is a highly efficient dishwasher that brings convenience and technological innovation right into your kitchen. Designed with user convenience in mind, this appliance is particularly suited for modern households that value functionality without compromising on style.

One of the standout features of the FDUD 44110 ULTIMA is its impressive energy efficiency. This dishwasher boasts a high energy rating, which not only helps to reduce utility bills but also minimizes the environmental impact. It's an eco-friendly choice for those looking to maintain a sustainable lifestyle.

The dishwasher has a capacity of 14 place settings, making it perfect for families or those who frequently entertain. Its spacious interior includes adjustable racking systems, allowing users to customize the layout based on the size and shape of their dishes. This flexibility is crucial for ensuring that all items, from tall pots to delicate glassware, are cleaned effectively.

The FDUD 44110 ULTIMA is equipped with multiple wash programs to cater to different cleaning needs. Among these are Eco, Rapid, and Intensive cycles, each designed to address specific levels of soil while ensuring thorough cleaning. The Eco cycle, for instance, uses less water and energy, while the Intensive cycle targets heavily soiled items, ensuring a spotless finish.

Another significant technological advancement in this model is its advanced sensor technology. This feature automatically detects the soil level of the dishes and adjusts the wash cycle accordingly. This means that users can enjoy optimum cleaning results with minimal resource usage, making it a smart choice for eco-conscious consumers.

This model also incorporates a Noise reduction technology, ensuring quiet operation during wash cycles, making it ideal for open-plan living spaces where noise can be a concern. Its sleek and modern design not only fits seamlessly into any kitchen décor but also ensures durability and easy maintenance.

Furthermore, the Hotpoint FDUD 44110 ULTIMA features a delay start option, allowing users to schedule cleaning cycles at their convenience. This is perfect for nights when you want to run the dishwasher without disrupting family activities or sleep.

In summary, the Hotpoint FDUD 44110 ULTIMA stands out as a reliable and feature-rich dishwasher. With its energy-efficient performance, customizable interior, advanced technology, and stylish design, it is a top choice for anyone looking to elevate their kitchen experience while managing their household chores effectively.
Top Page Image Contents