Connecting the water supplies

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.

Technical data

Dimensions			width 60 cm
Dimensions			height 85 cm
			depth 60 cm
Capacity			14 standard place-settings
Water supply			0,05 ÷ 1MPa (0.5 ÷ 10 bar)
pressure			7,25 – 145 psi
Power supply voltage			See appliance data plate
Total absorbed power			See appliance data plate

Fuse			See appliance data plate
			This dishwasher conforms to the
			following European Community
			Directives:
			-2006/95/EC (Low Voltage)
			-2004/108/EC (Electromagnetic
			Compatibility)
			-2009/125/EC (Comm. Reg.
			1016/2010) (Ecodesign)
			-97/17/EC (Labelling)
			-2012/19/EU Waste Electrical


			and Electronic Equipment
			(WEEE)

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

	If the inlet hose is not long enough, contact a specialist	GB

store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor/surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

*Only available in selected models.

FDUD 44110 ULTIMA specifications

The Hotpoint FDUD 44110 ULTIMA is a highly efficient dishwasher that brings convenience and technological innovation right into your kitchen. Designed with user convenience in mind, this appliance is particularly suited for modern households that value functionality without compromising on style.

One of the standout features of the FDUD 44110 ULTIMA is its impressive energy efficiency. This dishwasher boasts a high energy rating, which not only helps to reduce utility bills but also minimizes the environmental impact. It's an eco-friendly choice for those looking to maintain a sustainable lifestyle.

The dishwasher has a capacity of 14 place settings, making it perfect for families or those who frequently entertain. Its spacious interior includes adjustable racking systems, allowing users to customize the layout based on the size and shape of their dishes. This flexibility is crucial for ensuring that all items, from tall pots to delicate glassware, are cleaned effectively.

The FDUD 44110 ULTIMA is equipped with multiple wash programs to cater to different cleaning needs. Among these are Eco, Rapid, and Intensive cycles, each designed to address specific levels of soil while ensuring thorough cleaning. The Eco cycle, for instance, uses less water and energy, while the Intensive cycle targets heavily soiled items, ensuring a spotless finish.

Another significant technological advancement in this model is its advanced sensor technology. This feature automatically detects the soil level of the dishes and adjusts the wash cycle accordingly. This means that users can enjoy optimum cleaning results with minimal resource usage, making it a smart choice for eco-conscious consumers.

This model also incorporates a Noise reduction technology, ensuring quiet operation during wash cycles, making it ideal for open-plan living spaces where noise can be a concern. Its sleek and modern design not only fits seamlessly into any kitchen décor but also ensures durability and easy maintenance.

Furthermore, the Hotpoint FDUD 44110 ULTIMA features a delay start option, allowing users to schedule cleaning cycles at their convenience. This is perfect for nights when you want to run the dishwasher without disrupting family activities or sleep.

In summary, the Hotpoint FDUD 44110 ULTIMA stands out as a reliable and feature-rich dishwasher. With its energy-efficient performance, customizable interior, advanced technology, and stylish design, it is a top choice for anyone looking to elevate their kitchen experience while managing their household chores effectively.

Anti-condensation strip*

Technical data

Fuse