Hotpoint FDYF 11011 Style manual Installation, Positioning and levelling, Electrical Connection

Page 5

Installation

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with

the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see After Sales Service); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

GB

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See After Sales Service)

This appliance must be earthed.

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is fitted.

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow -

Earth

 

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH ‘E’

or

 

 

 

NEUTRAL

‘N’

LIVE

‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current-operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

5

Image 5
Contents Fdyf 11011 Style Instructions for useHotpoint Product FicheGeneral safety Precautions and safety adviceDisposal of old electrical appliances Saving energy and respecting the environmentRecycling & Disposal Information Electrical Connection InstallationPositioning and levelling Connecting the water inlet hose Connecting the water suppliesSink Waste System Anti-condensation stripAnti-flooding protection Advice regarding the first wash cycleDisplay Description of the applianceControl panel Lower rack Loading the racksCutlery basket Upper rackAdjusting the height of the upper rack Tip-up compartments with adjustable positionCutlery tray Unsuitable crockeryMeasuring out the detergent Start-up and useStarting the dishwasher Wash Cycle Wash cyclesWash options Special wash cycles and OptionsSetting the water hardness Rinse-aid dispenser settingRinse aid and refined salt Measuring out the rinse aidCare and maintenance Problem Possible causes / Solutions TroubleshootingAfter Sales Service After Sales ServiceParts and Accessories Essential Contact InformationMonths Parts and Labour Guarantee GuaranteeYear Parts Guarantee Extended GuaranteesPage 195113124.03

FDYF 11011 Style specifications

The Hotpoint FDYF 11011 Style is an advanced freestanding dishwasher designed to meet the needs of modern households. This appliance combines efficiency with innovative technology, ensuring that your dishes come out sparkling clean every time.

One of the standout features of the FDYF 11011 is its A+++ energy rating, which signifies exceptional energy efficiency. This not only helps in reducing your energy bills but also minimizes your environmental footprint. The Eco mode further optimizes water and energy consumption, making it an excellent choice for eco-conscious users.

The dishwasher offers a generous capacity, accommodating up to 13 place settings, which makes it ideal for larger families or those who frequently host gatherings. Thanks to the adjustable top basket, you can easily fit in larger items like pots and pans without compromising on space.

Equipped with Hotpoint's innovative Smart Sensor technology, the FDYF 11011 intelligently detects the soil level of your dishes, automatically adjusting the wash cycle for optimal performance. This ensures that every load is cleaned efficiently without unnecessary water or energy usage.

The appliance also features a variety of wash programs, including Quick Wash for when you’re in a hurry and Intensive Wash for tougher stains. The Half Load option allows for washing smaller loads, which is both time-efficient and resource-saving.

Another noteworthy characteristic is the Quiet operation of the FDYF 11011, which operates at a noise level of just 44 dB, making it one of the quieter models available. This is particularly beneficial for open-plan living spaces or for washing dishes late in the evening without disturbing the household.

Safety is prioritized as well, with features like a child lock and flood protection system that prevent accidents. The stainless steel interior not only provides durability but also resists stains and odors, ensuring that your dishwasher maintains a fresh environment.

Overall, the Hotpoint FDYF 11011 Style stands out in the crowded market of household appliances due to its blend of efficiency, advanced technology, and user-friendly features. It’s a reliable choice for anyone looking to streamline their dishwashing experience while committing to sustainability.