Installation, Positioning and levelling | Hotpoint FDM 550 specification

Installation

Keep this instruction manual in a safe place for EN future reference. If the appliance is sold, given away

or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

Technical data


	Dimensions			width 59.5 cm
	Dimensions			height 82 cm
				depth 57 cm
	Capacity			12 standard place-settings

	Water supply			0,05 ÷ 1MPa (0.5 ÷ 10 bar)
	pressure			4.3 psi – 145 psi

	Power supply			See appliance data plate
	voltage			See appliance data plate
	voltage

	Total absorbed			See appliance data plate
	power			See appliance data plate
	power

	Fuse			See appliance data plate

				This dishwasher conforms to
				the following European
				Community Directives:
				-73/23/EEC dated 19/02/73
				(Low Voltage) and subsequent
				modifications
				-89/336/EEC dated 03/05/89
				(Electromagnetic Compatibility)
				and subsequent modifications
				-97/17/EC (Labelling)
				-2002/96/ CE (Waste
				Electrical and Electronic
				Electrical and Electronic
				Equipment WEEE)
				Equipment WEEE)

*Only available in selected models.

FDM 550 specifications

The Hotpoint FDM 550 is an advanced freestanding dishwasher designed to make dishwashing effortless and energy-efficient. Known for its sleek design and user-friendly features, this model stands out in the crowded market of home appliances.

One of the most notable features of the Hotpoint FDM 550 is its capacity. It can accommodate up to 13 place settings, making it ideal for medium to large families or for those who enjoy entertaining guests. This generous space allows users to clean a significant amount of dishes, pots, and pans in one cycle, saving both time and energy.

The Hotpoint FDM 550 is not just about capacity; it also offers a range of wash programs that cater to different cleaning needs. With multiple settings, users can choose from options such as Eco, Intensive, Rapid, and Soak, ensuring that every load receives the right level of care. The Eco mode is particularly beneficial for environmentally conscious users since it uses less water and energy, aligning with modern sustainability goals.

In terms of performance, the FDM 550 is equipped with advanced technology that guarantees thorough cleaning. The model features a powerful water spray system that reaches every corner of the dishwasher, ensuring that even the most stubborn stains are removed. Additionally, the dishwasher operates at a low noise level, making it suitable for open-plan living spaces without disturbing the household.

The Hotpoint FDM 550 also incorporates an innovative drying system. Thanks to its efficient heating elements and effective airflow design, dishes come out dry and spotless, reducing the need for towel drying. This not only saves time but also minimizes the risk of cross-contamination, maintaining a hygienic kitchen environment.

Furthermore, Hotpoint has implemented user-friendly controls in the FDM 550, featuring an intuitive digital display that allows for easy program selection. The clear indicators notify users of the cycle progress, and an easy-to-access filter system ensures maintenance is hassle-free.

Overall, the Hotpoint FDM 550 dishwasher combines efficiency, capacity, and cutting-edge technology, making it a reliable choice for households looking to simplify their dishwashing routine while maintaining high standards of cleanliness and energy efficiency. With its thoughtfully designed features, this appliance offers a perfect blend of performance and convenience tailored for modern kitchens.