Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet (A) and outlet (B) hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation (see figure).

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

Ensure the fill hose is only fitted to the cold water supply. DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Standpipe

Ensure that the hose is not pushed too far down the standpipe.

If the end of your drain hose is fitted with ‘retaining flaps*’, ensure they are inserted fully into the standpipe. This will prevent the pipe from jumping out during installation and use.

DO NOT position the standpipe near an electrical outlet.

ENSURE that the drain hose is not kinked and it is routed as shown in the diagram.

The standpipe should have a bore of at least 38mm (11/2”). It should be installed as shown, have a trap fitted and must discharge into the same drain system as your household sink.

It MUST NOT be connected to a surface water drain.

*Only available in selected models.

FDM 550 specifications

The Hotpoint FDM 550 is an advanced freestanding dishwasher designed to make dishwashing effortless and energy-efficient. Known for its sleek design and user-friendly features, this model stands out in the crowded market of home appliances.

One of the most notable features of the Hotpoint FDM 550 is its capacity. It can accommodate up to 13 place settings, making it ideal for medium to large families or for those who enjoy entertaining guests. This generous space allows users to clean a significant amount of dishes, pots, and pans in one cycle, saving both time and energy.

The Hotpoint FDM 550 is not just about capacity; it also offers a range of wash programs that cater to different cleaning needs. With multiple settings, users can choose from options such as Eco, Intensive, Rapid, and Soak, ensuring that every load receives the right level of care. The Eco mode is particularly beneficial for environmentally conscious users since it uses less water and energy, aligning with modern sustainability goals.

In terms of performance, the FDM 550 is equipped with advanced technology that guarantees thorough cleaning. The model features a powerful water spray system that reaches every corner of the dishwasher, ensuring that even the most stubborn stains are removed. Additionally, the dishwasher operates at a low noise level, making it suitable for open-plan living spaces without disturbing the household.

The Hotpoint FDM 550 also incorporates an innovative drying system. Thanks to its efficient heating elements and effective airflow design, dishes come out dry and spotless, reducing the need for towel drying. This not only saves time but also minimizes the risk of cross-contamination, maintaining a hygienic kitchen environment.

Furthermore, Hotpoint has implemented user-friendly controls in the FDM 550, featuring an intuitive digital display that allows for easy program selection. The clear indicators notify users of the cycle progress, and an easy-to-access filter system ensures maintenance is hassle-free.

Overall, the Hotpoint FDM 550 dishwasher combines efficiency, capacity, and cutting-edge technology, making it a reliable choice for households looking to simplify their dishwashing routine while maintaining high standards of cleanliness and energy efficiency. With its thoughtfully designed features, this appliance offers a perfect blend of performance and convenience tailored for modern kitchens.