Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and
	when performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control
	panel may be cleaned using a non-abrasive cloth
	which has been dampened with water. Do not use
	solvents or abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a
	little vinegar.

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

Preventing unpleasant odours

•Always keep the door of the appliance ajar in order to avoid moisture from forming and being trapped inside the machine.

•Clean the seals around the door and detergent dispensers regularly using a damp sponge. This will avoid food becoming trapped in the seals, which is the main cause behind the formation of unpleasant odours.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below: 1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

Cleaning the sprayer arms
Food residue may become encrusted onto the sprayer
arms and block the holes used to spray the water. It is
therefore recommended that the arms are checked from		B
time to time and cleaned with a small non-metallic		B
time to time and cleaned with a small non-metallic
brush.		C
The two sprayer arms may both be removed.	1	C
The two sprayer arms may both be removed.		2
		2
To remove the upper sprayer
arm, rotate the locking ring in an
anti-clockwise direction.
The upper sprayer arm should
be replaced with the holes
facing upwards.
The lower sprayer arm can be
removed by pressing on the	3	4
removed by pressing on the
side tabs and pulling it upwards.
	After cleaning the filters, replace the filter assembly and
	fix it in position correctly; this is essential for maintaining
	the efficient operation of the dishwasher.
	Leaving the machine unused for
Cleaning the water inlet filter*	extended periods

If the water hoses are new or have not been used for an	•	Disconnect the appliance from the electricity supply
extended period of time, let the water run to make sure it		and shut off the water tap.
is clear and free of impurities before performing the	• Leave the door of the appliance ajar.
	• Leave the door of the appliance ajar.
necessary connections. If this precaution is not taken,	•	When you return, run a wash cycle when the
the water inlet could become blocked and damage the	•	When you return, run a wash cycle when the
the water inlet could become blocked and damage the		dishwasher is empty.
dishwasher.		dishwasher is empty.
dishwasher.

12	* Only available in selected models.

FDUD 4812 specifications

The Hotpoint FDUD 4812 is a modern built-in dishwasher that combines innovative technology with user-friendly features, making it a compelling choice for households seeking efficiency and convenience in their kitchen. With its sleek design, this model seamlessly integrates into kitchen cabinetry, providing aesthetic appeal without compromising on performance.

One of the standout features of the Hotpoint FDUD 4812 is its impressive energy efficiency. Rated A+, this dishwasher consumes less energy per cycle, which not only reduces utility bills but also minimizes environmental impact. The model is designed to handle a variety of washing needs, featuring multiple washing programs that cater to different soil levels and types of dishes. From intensive cycles for heavily soiled pots and pans to quick washes for lightly soiled items, the FDUD 4812 is versatile enough for any occasion.

Another key attribute of this dishwasher is its accommodating capacity. With a 14-place setting, families can stack up dirty dishes without worrying about space constraints. The adjustable upper rack and foldable tines provide added flexibility, allowing users to configure the interior based on the items being washed, such as tall glasses or large baking trays.

The Hotpoint FDUD 4812 also boasts advanced cleaning technologies. The Active Care technology features a unique wash system that ensures optimal cleaning performance by maintaining water at the right temperature and pressure, effectively eliminating stubborn stains. Additionally, the model includes a dedicated zone wash option, which intensifies the washing power in either the upper or lower basket, enhancing the cleaning process for heavily soiled loads.

Quiet operation is another notable characteristic, with noise levels as low as 44 dB, making it a suitable option for open-plan living spaces or homes where quiet is desired. The delay start feature further enhances usability, allowing users to set the dishwasher to run at a more convenient time, such as during off-peak energy hours or overnight.

Safety features are also integrated into the Hotpoint FDUD 4812, including a child lock to prevent accidental operation and a water softener that helps reduce the effects of hard water on utensils, ensuring both longevity and cleanliness.

In conclusion, the Hotpoint FDUD 4812 is not just a dishwasher, but a reliable kitchen aid that blends efficiency, advanced technology, and thoughtful design. Its performance, energy efficiency, and user-centric features collectively make it an excellent choice for the modern kitchen.