Connecting the water supplies

Connection to the water and electricity supplies should only be performed by a qualified technician.

The dishwasher should not stand on top of the water hoses or the electricity supply cable.

Connecting the water inlet hose

The water inlet and outlet hoses and the electricity supply cable may be positioned towards the right or the left in order to achieve the best possible installation.

•To a suitable cold water connection point: before attaching the hose, run the water until it is perfectly clear so that any impurities that may be present in the water do not clog the appliance; after performing this operation, screw the inlet hose tightly onto a tap with a ¾ gas threaded connection.

•To a suitable hot water connection point: your dishwasher may be provided with hot water from the mains supply (if you have a central heating system with radiators) provided that it does not exceed a temperature of 60°C.

Screw the hose to the tap as described for connection to a cold water supply.

If the inlet hose is not long enough, contact a specialist store or an authorised technician (see After Sales Service).

The water pressure must be within the values indicated in the Technical data table (see Installation).

The hose should not be bent or compressed.

The appliance must be connected to the water supply network using new hoses.

Do not use old hoses.

Ensure that the new hose supplied is connected and the old hose is disposed of safely.

DO NOT overtighten the hose connector, hand tight is sufficient.

Ensure the fill hose is not kinked.

Tap connections*: A range of adaptors are available to suit your tap.

DO NOT connect the dishwasher to a single outlet instantaneous water heater or an electric heater.

Sink Waste System

Connect the outlet hose (without bending it) to a drain duct with a minimum diameter of 32 mm.

The outlet hose must be at a height ranging from 40 to 80 cm (from 15’’ to 31’’) from the floor / surface where the dishwasher rests (A).

•before connecting the drain hose, remove any internal restrictions; this will prevent a build up of debris which could cause a blockage

•remove any restrictions from the waste spigot and ensure that the sealing bung is removed (B).

It MUST NOT be connected to a surface water drain.

•Untie the end of the GREY drainage hose from the rear of the appliance.

•If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug.

Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood.

Fit hose to waste securely using a “Jubilee” type clip.

*Only available in selected models.

FDUD 4812 specifications

The Hotpoint FDUD 4812 is a modern built-in dishwasher that combines innovative technology with user-friendly features, making it a compelling choice for households seeking efficiency and convenience in their kitchen. With its sleek design, this model seamlessly integrates into kitchen cabinetry, providing aesthetic appeal without compromising on performance.

One of the standout features of the Hotpoint FDUD 4812 is its impressive energy efficiency. Rated A+, this dishwasher consumes less energy per cycle, which not only reduces utility bills but also minimizes environmental impact. The model is designed to handle a variety of washing needs, featuring multiple washing programs that cater to different soil levels and types of dishes. From intensive cycles for heavily soiled pots and pans to quick washes for lightly soiled items, the FDUD 4812 is versatile enough for any occasion.

Another key attribute of this dishwasher is its accommodating capacity. With a 14-place setting, families can stack up dirty dishes without worrying about space constraints. The adjustable upper rack and foldable tines provide added flexibility, allowing users to configure the interior based on the items being washed, such as tall glasses or large baking trays.

The Hotpoint FDUD 4812 also boasts advanced cleaning technologies. The Active Care technology features a unique wash system that ensures optimal cleaning performance by maintaining water at the right temperature and pressure, effectively eliminating stubborn stains. Additionally, the model includes a dedicated zone wash option, which intensifies the washing power in either the upper or lower basket, enhancing the cleaning process for heavily soiled loads.

Quiet operation is another notable characteristic, with noise levels as low as 44 dB, making it a suitable option for open-plan living spaces or homes where quiet is desired. The delay start feature further enhances usability, allowing users to set the dishwasher to run at a more convenient time, such as during off-peak energy hours or overnight.

Safety features are also integrated into the Hotpoint FDUD 4812, including a child lock to prevent accidental operation and a water softener that helps reduce the effects of hard water on utensils, ensuring both longevity and cleanliness.

In conclusion, the Hotpoint FDUD 4812 is not just a dishwasher, but a reliable kitchen aid that blends efficiency, advanced technology, and thoughtful design. Its performance, energy efficiency, and user-centric features collectively make it an excellent choice for the modern kitchen.