Troubleshooting

	Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance
EN	(see Assistance).

Malfunction:	Possible causes / Solutions:
The dishwasher does not start.	•	The plug has not been inserted into the electrical socket
		properly, or there is no power in the house.
	•	The dishwasher door has not been shut properly.
	•	A delayed start has been programmed (see Start-up and use).
No water enters the dishwasher.	•	There is no water in the mains supply.
	•	The water inlet hose is bent (see Installation).
No water drains out from the	•	The dishwasher cycle has not yet finished.
dishwasher.	•	The water outlet hose is bent (see Installation).
	•	The drain duct is blocked.
	•	The filter is clogged up with food residues.

The dishwasher makes	•	The dishes are rattling against each other or against the
excessive noise.		sprayer arms.
The dishes and glasses are	•	The level of the refined salt is low or the dosage setting is not
covered in a white film or		suited to the hardness of the water (see Rinse aid and salt).
limescale deposits.	•	The lid on the salt dispenser is not closed properly.
	•	The rinse aid has been used up or the dosage is too low.
	•	The crockery is made from non-stick material.
The dishes and glasses are
streaked or have a bluish	•	The rinse aid dosage is too high.
tinge.
The crockery has not been dried	•	The rinse aid has been used up or the dosage is too low (see
properly.		Rinse aid and salt).
	•	The rinse aid dispenser setting is not high enough.
	•	A wash cycle without a drying programme has been selected.
The dishes are not clean.	•	The racks are overloaded (see Loading the racks).
	•	The crockery has not been arranged well.
	•	The sprayer arms cannot move freely.
	•	The wash cycle is too gentle (see Wash cycles).
	•	The detergent has not been measured out correctly or it is not
		suited to the type of wash cycle (see Start-up and use ).
	•	The filter is dirty or blocked (see Care and maintenance).
	•	The refined salt level is low (see Rinse aid and salt).
Tap shut-off alarm.	•	Turn on the tap and the appliance will start after a few
(several short beeps are emitted)		minutes.
(the second and third WASH	•	The appliance lock has been activated because no action was
CYCLE indicator lights flash,		taken when the beeps sounded. Switch off the machine using
beginning from the right).		the ON/OFF button, turn on the tap and switch the machine
		back on after 20 seconds by pressing the same button. Re-
		programme the machine and restart the wash cycle.
Clogged filter alarm	•	Switch off the machine by pressing the ON/OFF button and
(the second and fourth WASH		clean the filters (see Maintenance), then switch the
CYCLE indicator lights flash,		dishwasher back on by pressing the same button. Re-
beginning from the right).		programme the machine and restart the wash cycle.

Water loading solenoid	•	Switch off the appliance by pressing the ON/OFF button and
valve malfunction alarm		switch it back on after a minute. If the alarm continues, shut
(the third WASH CYCLE indicator		off the water tap to eliminate the risk of flooding, remove the
light flashes, beginning from the		plug from the electrical socket and call Assistance.
right).

BFQ 700 specifications

The Hotpoint BFQ 700 is a modern and innovative combination washing machine and dryer that caters to the needs of busy households. Featuring a sleek design, this appliance is not only space-efficient but also packed with advanced technology and features that ensure effective and gentle care for all types of fabrics.

One of the standout characteristics of the BFQ 700 is its impressive load capacity, allowing users to wash and dry large amounts of laundry in one cycle. With a washing capacity of 7 kg and drying capacity of up to 5 kg, it strikes a perfect balance for everyday use. This versatility makes it ideal for families or individuals with a demanding lifestyle.

The BFQ 700 is equipped with a variety of innovative technologies, including Hotpoint's exclusive "Anti-Stain" system. This feature effectively tackles and removes stubborn stains without the need for pre-treatment, ensuring that clothes come out looking fresh and clean every time. The appliance also has a multi-purpose washing cycle that caters to different types of fabrics, from delicate items to heavier materials, providing the right care for each load.

Energy efficiency is a major consideration for the Hotpoint BFQ 700. It boasts an excellent energy rating, contributing to lower household bills and reduced environmental impact. This appliance incorporates advanced sensors that adapt water and energy usage based on the size and type of the load, optimizing its performance while saving resources.

Moreover, the BFQ 700 comes with a range of customizable settings and programs, including quick wash options that allow users to complete their laundry in as little as 30 minutes. The user-friendly digital display makes it easy to navigate through various modes and timings, enhancing convenience and functionality.

Durability is another key feature of the Hotpoint BFQ 700. Constructed with robust materials and advanced engineering, this machine is designed to withstand regular use and ensure long-lasting performance. Its modern aesthetic makes it a suitable addition to any laundry room.

In summary, the Hotpoint BFQ 700 combines innovative technology, energy efficiency, and user-friendly features, making it an excellent choice for those seeking a reliable and effective washing and drying solution. Its capacity, stain removal capabilities, and customizable programs set it apart in the competitive market of laundry appliances, ensuring satisfaction for users looking to enhance their laundry experience.

Troubleshooting

Malfunction:

Possible causes / Solutions:

BFQ 700 specifications