Hotpoint BFQ 700 manual Installation, Positioning and levelling, Technical data

Page 2

Installation

EN

￿ Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given away

 

or moved, please ensure the manual is kept with the

 

 

machine, so that the new owner may benefit from the

 

advice contained within it.

 

￿ Please read this instruction manual carefully: it

 

contains important information regarding the safe

 

installation, use and maintenance of the appliance.

 

￿ If the appliance must be moved at any time, keep it

 

in an upright position; if absolutely necessary, it may

 

be tilted onto its back.

Positioning and levelling

1. Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2. Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or even with the wall. This appliance can also be recessed under a single worktop (see the Assembly instruction sheet).

3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4. Adjust the height of the rear feet from the front of the appliance*: use a screwdriver to tighten or loosen the screws on the lower part of the dishwasher.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add approximately 2 kg of salt (see Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. It is also normal that the LOW SALT* indicator light continues to flash for a few cycles after the salt has been loaded.

Technical data

 

 

 

 

Dimensions

width 59.5 cm

height 82 cm

 

 

 

depth 57 cm

 

 

Capacity

12 standard place-settings

 

 

Water supply

30 Kpa ÷ 1Mpa (0.3 ÷ 10 bar)

pressure

4.3 psi – 145 psi

 

 

Power supply

See appliance data plate

voltage

 

 

 

Total absorbed

See appliance data plate

power

 

 

 

Fuse

See appliance data plate

 

 

 

 

 

 

 

This dishwasher conforms to

 

 

 

the following European

 

 

 

Community Directives:

 

 

 

-73/23/EEC dated 19/02/73

 

 

 

(Low Voltage) and subsequent

 

 

 

modifications

 

 

 

-89/336/EEC dated 03/05/89

 

 

 

(Electromagnetic Compatibility)

 

 

 

and subsequent modifications

 

 

 

-97/17/EC (Labelling)

 

 

 

-2002/96/ CE Waste

 

 

 

Electrical and Electronic

 

 

 

 

 

 

Equipment (WEEE)

 

 

 

 

* Only available in selected models.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Instruction booklet Positioning and levelling InstallationTechnical data Electrical Connection LiveConnecting the water supplies Sink Waste System Control panel Description of the applianceOverall view Cutlery basket Loading the racksLower rack Upper rackLoading the detergent Start-up and useStarting the dishwasher Washing optionsWash cycles Wash cycle tableLoading the refined salt Rinse aid and refined saltLoading the rinse aid Care and maintenance Disposal of old electrical appliances Precautions and adviceGeneral safety Saving energy and respecting the environmentRecycling & Disposal Information Troubleshooting Malfunction Possible causes / SolutionsLoad for 12 Standard Settings tests Information for test labsEssential Contact Information After Sales ServiceParts and Accessories Appliance RegistrationGuarantee Guarantee terms and conditionsPage Page 195055348.01

BFQ 700 specifications

The Hotpoint BFQ 700 is a modern and innovative combination washing machine and dryer that caters to the needs of busy households. Featuring a sleek design, this appliance is not only space-efficient but also packed with advanced technology and features that ensure effective and gentle care for all types of fabrics.

One of the standout characteristics of the BFQ 700 is its impressive load capacity, allowing users to wash and dry large amounts of laundry in one cycle. With a washing capacity of 7 kg and drying capacity of up to 5 kg, it strikes a perfect balance for everyday use. This versatility makes it ideal for families or individuals with a demanding lifestyle.

The BFQ 700 is equipped with a variety of innovative technologies, including Hotpoint's exclusive "Anti-Stain" system. This feature effectively tackles and removes stubborn stains without the need for pre-treatment, ensuring that clothes come out looking fresh and clean every time. The appliance also has a multi-purpose washing cycle that caters to different types of fabrics, from delicate items to heavier materials, providing the right care for each load.

Energy efficiency is a major consideration for the Hotpoint BFQ 700. It boasts an excellent energy rating, contributing to lower household bills and reduced environmental impact. This appliance incorporates advanced sensors that adapt water and energy usage based on the size and type of the load, optimizing its performance while saving resources.

Moreover, the BFQ 700 comes with a range of customizable settings and programs, including quick wash options that allow users to complete their laundry in as little as 30 minutes. The user-friendly digital display makes it easy to navigate through various modes and timings, enhancing convenience and functionality.

Durability is another key feature of the Hotpoint BFQ 700. Constructed with robust materials and advanced engineering, this machine is designed to withstand regular use and ensure long-lasting performance. Its modern aesthetic makes it a suitable addition to any laundry room.

In summary, the Hotpoint BFQ 700 combines innovative technology, energy efficiency, and user-friendly features, making it an excellent choice for those seeking a reliable and effective washing and drying solution. Its capacity, stain removal capabilities, and customizable programs set it apart in the competitive market of laundry appliances, ensuring satisfaction for users looking to enhance their laundry experience.
Top Page Image Contents