Installation, Positioning and levelling | Hotpoint 910 specification

Installation

Keep this instruction manual in a safe place for future

EN reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.

Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

This appliance is intended to be used in household and similar applications such as:

-staff kitchen areas in shops, offices and other working environments;

-farm houses;

-by clients in hotels, motels and other residential type environments;

-bed and breakfast type environments.

Positioning and levelling

1.Remove the appliance from all packaging and check that it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Check the dishwasher by placing it so that its sides or back panel are in contact with the adjacent cabinets or

even with the wall. This appliance can also be recessed under a single worktop* (see the Assembly instruction sheet).

3.Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

4*. Adjust the height of the rear foot from the front of the appliance* on the central lower part of the dishwasher, turning a hexagonal spanner (red color) with an opening of 8 mm in a clockwise direction to increase the height or in an anticlockwise direction to decrease the height.

Anti-condensation strip*

After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation that may form.

Advice regarding the first wash cycle

After the appliance has been installed, immediately before running the first wash cycle, completely fill the salt dispenser with water and add only then approximately 1 kg of salt (see chapter entitled Rinse aid and refined salt). The water may overflow: this is normal and is not a cause for concern. Select the water hardness value (see chapter entitled Rinse aid and refined salt). - After the salt has been poured into the machine, the LOW SALT indicator light* switches off.

If the salt container is not filled, the water softener and the heating element may be damaged as a result.

Technical data

				width 45 cm
	Dimensions			height 85 cm
				depth 60 cm
	Capacity			10 standard place-settings

	Water supply			0,05 ÷ 1MPa (0.5 ÷ 10 bar)
	pressure			7,25 psi – 145 psi

	Power supply			See appliance data plate
	voltage			See appliance data plate
	voltage

	Total absorbed			See appliance data plate
	power
	Fuse			See appliance data plate
				This dishwasher conforms to the
				following European Community
				Directives:
				-2006/95/EC (Low Voltage)
				-2004/108/EC (Electromagnetic
				Compatibility)
				-2005/32/EC (Comm. Reg.
				1275/2008) (Ecodesign)
				-97/17/EC (Labelling)
				-2002/96/ CE Waste Electrical
				and Electronic Equipment
				(WEEE)

*Only available in selected models.

910 specifications

The Hotpoint 910 is a sophisticated cooking appliance that combines modern technology with user-friendly features to enhance the culinary experience in any kitchen. Designed with versatility in mind, this appliance offers a plethora of functions that cater to a variety of cooking styles and preferences.

One of the standout features of the Hotpoint 910 is its advanced cooking modes. It includes options such as conventional baking, grill, and programmable auto-cook functions. These modes allow users to easily prepare everything from simple roasts to intricate desserts, ensuring that meals are cooked to perfection every time. The built-in microwave function adds another layer of convenience, allowing for quick reheating and defrosting without needing to wait for a traditional oven to preheat.

Another distinctive characteristic of the Hotpoint 910 is its spacious capacity. With ample interior space, this appliance is designed to accommodate larger dishes, making it ideal for families or those who love entertaining guests. The adjustable racks provide flexibility in cooking larger items, ensuring that users can make the most of the available space.

The technology behind the Hotpoint 910 is impressive. It features a smart temperature control system that guarantees even and consistent heat throughout the cooking process. This means that dishes are cooked uniformly, reducing the chances of hot spots or uneven results. The digital control panel is intuitive and easy to navigate, allowing users to customize their cooking settings with precision.

Additionally, the Hotpoint 910 incorporates energy-efficient technologies that help reduce power consumption, making it an environmentally friendly choice. The appliance is designed to minimize energy waste while still delivering exceptional cooking performance.

Cleaning and maintenance of the Hotpoint 910 are made easier with its self-cleaning feature, which eliminates the need for harsh chemicals or laborious scrubbing. The interior is crafted from materials that are resistant to stains and odors, ensuring that it remains fresh and clean after each use.

In summary, the Hotpoint 910 brings a perfect blend of functionality, efficiency, and ease of use to the kitchen. Its diverse cooking modes, spacious capacity, advanced temperature control, and user-friendly design make it a valuable addition to any home. Whether you're a seasoned chef or a culinary novice, the Hotpoint 910 is equipped to elevate your cooking experience.