Care and maintenance

Shutting off the water and electricity
supplies
•	Turn off the water tap after every wash cycle to avoid
	leaks.
•	Always unplug the appliance when cleaning it and when
	performing maintenance work.
Cleaning the dishwasher
•	The external surfaces of the machine and the control
	panel may be cleaned using a non-abrasive cloth which
	has been dampened with water. Do not use solvents or
	abrasive products.
•	Any marks on the inside of the appliance may be
	removed using a cloth dampened with water and a little
	vinegar.
Preventing unpleasant odours
•	Always keep the door of the appliance ajar in order to
	avoid moisture from forming and being trapped inside
	the machine.
•	Clean the seals around the door and detergent
	dispensers regularly using a damp sponge. This will
	avoid food becoming trapped in the seals, which is the
	main cause behind the formation of unpleasant odours.
Cleaning the sprayer arms

Clean the water inlet filter at the tap outlet regularly.

-Turn off the water tap.

-Unscrew the end of the water inlet hose, remove the filter and clean it carefully under running water.

-Replace the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food residues from the washing water and then recirculate the water. They should be cleaned if you wish to achieve the best results in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters, or if the filter is loose.

•After several washes, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below: 1. Turn the cylindrical filter C in an anti-clockwise direction and pull it out (fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the side flaps (fig. 2).

3. Slide out the stainless steel plate filter A (fig. 3).

4. Inspect the trap and remove any food residue. NEVER REMOVE the wash cycle pump (black detail) (fig. 4).

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that the arms are checked from time to time

and cleaned with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer

arm, rotate the locking ring in

an anti-clockwise direction.

The upper sprayer arm should

be replaced with the holes

facing upwards.

The lower sprayer arm can be

removed by pulling it upwards.

	B
2	C
2

Cleaning the water inlet filter* If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

After cleaning the filters, replace the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

Leaving the machine unused for extended periods

•Disconnect the appliance from the electricity supply and shut off the water tap.

•Leave the door of the appliance ajar.

•When you return, run a wash cycle when the dishwasher is empty.

*Only available in selected models.

910 specifications

The Hotpoint 910 is a sophisticated cooking appliance that combines modern technology with user-friendly features to enhance the culinary experience in any kitchen. Designed with versatility in mind, this appliance offers a plethora of functions that cater to a variety of cooking styles and preferences.

One of the standout features of the Hotpoint 910 is its advanced cooking modes. It includes options such as conventional baking, grill, and programmable auto-cook functions. These modes allow users to easily prepare everything from simple roasts to intricate desserts, ensuring that meals are cooked to perfection every time. The built-in microwave function adds another layer of convenience, allowing for quick reheating and defrosting without needing to wait for a traditional oven to preheat.

Another distinctive characteristic of the Hotpoint 910 is its spacious capacity. With ample interior space, this appliance is designed to accommodate larger dishes, making it ideal for families or those who love entertaining guests. The adjustable racks provide flexibility in cooking larger items, ensuring that users can make the most of the available space.

The technology behind the Hotpoint 910 is impressive. It features a smart temperature control system that guarantees even and consistent heat throughout the cooking process. This means that dishes are cooked uniformly, reducing the chances of hot spots or uneven results. The digital control panel is intuitive and easy to navigate, allowing users to customize their cooking settings with precision.

Additionally, the Hotpoint 910 incorporates energy-efficient technologies that help reduce power consumption, making it an environmentally friendly choice. The appliance is designed to minimize energy waste while still delivering exceptional cooking performance.

Cleaning and maintenance of the Hotpoint 910 are made easier with its self-cleaning feature, which eliminates the need for harsh chemicals or laborious scrubbing. The interior is crafted from materials that are resistant to stains and odors, ensuring that it remains fresh and clean after each use.

In summary, the Hotpoint 910 brings a perfect blend of functionality, efficiency, and ease of use to the kitchen. Its diverse cooking modes, spacious capacity, advanced temperature control, and user-friendly design make it a valuable addition to any home. Whether you're a seasoned chef or a culinary novice, the Hotpoint 910 is equipped to elevate your cooking experience.