Hotpoint BFI62 manual Troubleshooting, Resolving minor problems yourself

Page 15

D ISHWASHER

Troubleshooting

Caution

-Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerable equipment damage, as well as danger to the user.

-The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out. Switch off at the mains socket and water supply and remove the plug.

Resolving minor problems yourself.

Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without having to call out a service engineer. Not only does this save costs but it also means the appliance is available for use again that much sooner. The following list of common occurences and their remedies should help you identify the causes of most problems.

If the dishwasher won't

start, check...

■Isthedishwasherpluggedinat the electricity socket and switchedon?

■Is there a power failure, check otherappliances.

■Checkthefuse.

■Is the water supply tap turned on?

■Isthewaterinlethoseconnected properly?

■Is the pressure of the water supplysufficient?

■Istheinlethosekinked?

■Is the filter on the water supply hoseblocked?

■Isthedishwasherdoornotclosed properly?

If water remains inside the

dishwasher, check...

■thedrainhoseisnotkinked.

■the drain syphon is not obstructed.

■the dishwasher filters are not clogged.

If the dishes are not being

cleaned properly, check...

■thecorrectamountofdetergent hasbeenadded.

■thereisregeneratingsaltinthe saltcontainer.

■the dishes have been loaded correctly.

■the selected programme is suitableforthetypeofdishesand thedegreeofsoiling.

■allfiltersarecleanandpositioned correctly.

■the spray arm nozzles are not obstructed.

■thereisnothingobstructingthe rotationofthesprayarms.

If the dishes fail to dry or

remain dirty, check...

■thereisrinseaidinsidetherinse aidcontainer.

■therinseaiddispensersettingis correct.

■the detergent being used is of goodqualityandhasnotlostits effectiveness (for example, throughincorrectstorage,with theboxleftopen).

If the dishes show signs of streaking, staining etc. check...

■therinseaiddispensersettingis notsettoohigh.

If there are visible traces of rust inside the tank, check...

■the cap off the salt container is securely closed and that the watersoftnersettingiscorrect.

■thecorrectamountofdetergent isbeingused.Certaindetergents can be more corrosive than others.

■the tank is made of steel and thereforeanyrustmarksaredue toexternalelements(fragments ofrustfromthetankpipes,pots, cutleryetc.)Specialproductsare commerciallyavailabletoremove suchmarks.

Error messages

Yourdishwasherisequippedwitha safety system which is able to de- tectoperatingfaults.

Thesefaultsarereportedbyoneor twocycleindicatorlights"M"flash- ingrapidly.Takeanoteofwhichlights areflashing,turntheapplianceoff andcallHotpointServicefortechni- calassistance.

Tap off alarm

Ifyouhaveforgottentoturnthewa- ter tap on, your appliance will re- mindyouofthisbysoundingafew shortbeepsforafewminutes.Turn the tap on and your appliance will startupagainafterafewminutes. Wereyoutobeabsentwhenthese beepsaresounded,theappliance will be blocked automatically and cycle2and3indicatorlights(daily and rapid cycle) will flash rapidly. Turn the appliance off at the ON- OFF button, turn on the water tap andwaitapproximately20seconds beforeturningtheapplianceback on.

Re-select the wash cycle and the appliancewillstartupagain.

If after all the checks, the appli- ance still does not operate or the problem persists, call Hotpoint Service (see KEY CONTACTS, backpage)andinformthemof:

-thetypeofproblem

-the abbreviation of the model name(Mod.)andtherelativenum- bers(S/N)writtenontheratingplate located on the inner edge of the door.

Switch off at the mains socket and remove the plug. Turn off the water supply.

13

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Instructions for Installation and Use Page Contents Page Fuses Electrical ConnectionDONOTremovetheratingplate For your SafetyHeight Adjustment LevellingStandpipe Controls ON-OFF Indicator lightCycle indicator light Getting to know your DishwasherCycle end How to use your DishwasherFirst of all Modifying a wash cycle in progressZdvk Programme ChartBefore Using your Dishwasher Adjusting the water softenerFilling the salt container 25 gr Cleaner DishesAdding detergent If it wont closeWhat goes into the upper basket? How to adjust the upper basketLoading your Dishwasher What goes into the lower basket?Unplug the appliance Care and CleaningCleaning the spray arms Cleaning the Water Inlet FilterResolving minor problems yourself TroubleshootingRinse aid DetergentLoading the detergent See table at the endRepair Service and Information Help Desk Genuine Parts and AccessoriesUK 08709 077Extended Warranties Guarantee terms and conditions Satisfaction guaranteed or your money backPage 195.036.720.00 Repair Service and Information DeskGenuine Parts and Accessories January 2003 Part no. FP149

BFI62 specifications

The Hotpoint BFI62 is a stylish and versatile built-in oven that combines modern technology with user-friendly features, making it an ideal addition to any kitchen. This appliance is designed to enhance cooking performance while providing a sleek aesthetic that complements contemporary kitchen designs.

One of the standout features of the Hotpoint BFI62 is its multifunctional cooking options. With multiple cooking modes, including conventional, fan-assisted, and grill functions, users have the flexibility to prepare a wide range of meals to suit their preferences. The fan-assisted cooking mode ensures even heat distribution, allowing for perfectly cooked dishes, while the grill function is perfect for achieving that desired crispy finish on meats and vegetables.

Another notable characteristic of the BFI62 is its generous capacity. With a spacious interior, it allows users to cook larger meals or multiple dishes simultaneously, making it a great choice for families or those who love to entertain. Additionally, the oven is equipped with a telescopic rail system, providing easy access to dishes and reducing the risk of burns when checking on food.

The Hotpoint BFI62 also boasts a range of convenient technologies aimed at simplifying the cooking experience. The digital display and easy-to-use control panel make navigation intuitive, allowing users to set cooking times and temperatures with minimal effort. Furthermore, the oven features a built-in timer, ensuring that meals are cooked to perfection every time.

Cleaning the BFI62 is made hassle-free with its special catalytic lining, which helps break down food residue during the cooking process. This means less scrubbing for the user, as the oven essentially cleans itself, saving time and effort.

Safety is also a priority with the Hotpoint BFI62. The oven is designed with a cool door feature, ensuring that the outer surface remains safe to touch even during operation. This is particularly beneficial in homes with young children.

In summary, the Hotpoint BFI62 is a high-performance built-in oven that combines modern design with a multitude of features and technologies. Its multifunctional capabilities, spacious interior, user-friendly controls, and easy maintenance make it an excellent choice for both novice cooks and culinary enthusiasts alike.
Top Page Image Contents