Hotpoint BS89EK, BS89EX manual Electrical Connection, This Appliance Must be Earthed

Page 3

Electrical Connection

Electrical connection

The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.

!THIS APPLIANCE MUST BE EARTHED.

Connecting the power supply cable

To open the terminal board:

Using a screwdriver, press on the tabs situated on each side of the terminal board cover.

Pull open the terminal board cover.

To connect the power supply cable, proceed as follows:

_Unscrew the cable clamp screw and the contact screws L-N-$.

Fasten the wires beneath the screwheads using the following colour scheme: Blue (N) Brown (L) Yellow-Green￿ $

Fasten the power supply cable in the corresponding cable clamp and close the cover.

Power cable supply connection to the electrical

mains:GB

We recommend you use a power supply cable which is long enough to allow you to take the oven out of its recess in the event of maintenance operations (only use HAR - H 05 - RRF quality cables fitted with a plug conforming to the regulations in force.

The plug must be accessible at all times.

Unplug the appliance before all operations, even when replacing the oven lamp.

Using the appliance without correct earthing is highly dangerous.

!After connecting the appliance to the flexible cable, tighten all the screws on the terminal board.

TABLE OF CHARACTERISTICS

 

width 43.5 cm

Dimensions

height 32 cm

 

depth 40 cm

Volume

56 l

Electrical Connection:

4 2 N L

Voltage Frequency: 230 V-1+N 50Hz

Fuse Section: 16A Supply cable: 3x1.5mm2

Electrical

voltage: 220 - 240 V~ 50/60Hz

maximum power absorbed 2800 W

connections

(see data plate)

 

 

 

 

 

Directive 2002/40/EC on the label of

 

electric ovens. Standard EN 50304

ENERGY

Energy consumption for Natural

convection – heating mode:

LABEL

Traditional mode

 

Declared energy consumption for

 

Forced convection Class – heating

 

mode:

Baking

You can connect your oven to the system means of a terminal board. Refer to above information for the minimal cable sections and the calibration of the protective elements according to the connection.

If the appliance is installed with a junction box, an omnipolar circuit breaker - with a minimum contact opening of 3mm - should be installed between the appliance and the mains.

This appliance conforms to the following European Economic Community directives: 73/23/EEC dated 19/02/73 (Low Voltage) and subsequent amendments - 89/336/EEC dated 03/05/89 (Electromagnetic Compatibility) and subsequent amendments - 93/68/EEC dated 22/07/93 and subsequent amendments. 2002/96/EC

3

Image 3
Contents Oven Operating InstructionsInstallation This Appliance Must be Earthed Electrical ConnectionDisplay Description ApplianceOverall view Control panelStarting the oven Setting the clockSetting the timer Start-up and useCooking modes Programming cooking Practical cooking adviceCooking advice table Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCare and maintenance After Sales Service After Sales ServiceGBGuarantee Guarantee

BS89EK, BS89EX specifications

The Hotpoint BS89EX and BS89EK are two advanced built-in ovens that stand at the forefront of modern kitchen technology. Designed to meet the demands of contemporary cooking while offering exceptional performance, these models combine style, functionality, and innovative features, catering to both amateur cooks and seasoned chefs.

One of the standout features of the Hotpoint BS89 series is its impressive multifunctional capabilities. Equipped with various cooking modes, including conventional, fan-assisted, grill, and defrost settings, these ovens provide versatility for preparing a wide range of dishes. The fan-assisted function ensures even heat distribution, allowing for perfectly cooked meals every time. This feature is enhanced by the oven's sizable capacity, which accommodates multiple dishes simultaneously, making it ideal for family gatherings and entertaining.

The BS89EX and BS89EK also boast Hotpoint's advanced self-cleaning technology, minimizing the hassle of maintenance. The pyrolytic cleaning function heats the oven to a high temperature, reducing food residues to ash, which can be easily wiped away. This not only saves time on cleaning but also ensures that the oven remains in optimal condition for future use.

Another notable characteristic of these models is their energy efficiency. Rated highly for energy performance, the BS89EX and BS89EK are designed to consume less electricity while delivering high-quality cooking results. This aspect not only benefits the environment but also contributes to lower energy bills, making them an economical choice for families.

In terms of design, the Hotpoint BS89 series features a sleek, modern aesthetic, with a stainless-steel finish that enhances any kitchen decor. The intuitive digital display and easy-to-use control knobs make cooking adjustments seamless and clear, allowing users to focus on the culinary experience rather than the technology.

Safety is also a top priority with these ovens. Equipped with features such as cool-touch doors and child lock settings, the BS89EX and BS89EK ensure that safety is considered while cooking. This gives peace of mind to households with young children or pets.

Overall, the Hotpoint BS89EX and BS89EK ovens exemplify a blend of innovation, style, and practicality. With their multifunctional capabilities, energy efficiency, self-cleaning technology, and safety features, these ovens stand out as excellent choices for anyone looking to elevate their cooking experience in a contemporary kitchen setting.