!Do not touch the light bulb directly with your hands.
GB
!Do not use the oven lamp as/for ambient lighting.
Sliding rack kit assembly
|
| A |
Left | Right guide | |
guide rail | rail |
|
B |
|
|
| C |
|
| of | |
|
| Direction |
|
| extraction |
To assemble the sliding racks:
1.Remove the two frames, lifting them away from the spacers A (see figure).
2.Choose which shelf to use with the sliding rack. Paying attention to the direction in which the sliding rack is to be extracted, position joint B and then joint C on the frame.
D |
3.Secure the two frames with the guide rails using the holes provided on the oven walls (see diagram). The holes for the left frame are situated at the top, while the holes for the right frame are at the bottom.
4.Finally, fit the frames on the spacers A.
!Do not place the sliding racks in position 5.
Troubleshooting
| Problem | Possible cause | Solution |
|
| The “Clock button” and the | The appliance has just been | Set the clock. |
|
| digits on the display flash. | connected to the electricity mains |
|
|
|
| or there has been a blackout. |
|
|
| A programmed cooking mode | There has been a blackout. | Reprogram the cooking mode. |
|
| does not start. |
|
|
|
| Only the high luminosity | The appliance is in standby mode | Press any button to exit |
|
| “Clock button” is lit. |
| standby mode. |
|
| An automatic mode has been | The temperature inside the oven | Wait for the oven to cool down. |
|
| selected. “Hot” appears on the | is higher than the suggested |
|
|
| display and cooking does not | value for the selected mode. |
|
|
| start. |
|
|
|
| Positions 1 and 5: the direct | We recommend switching |
| |
| selected and the food looks burnt. | heat could cause | dripping pan positions halfway |
|
|
| through cooking. |
| |
|
| foods to burn. |
|
|
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24 | ||||
| 18 |
|
|
|