Start-up and use, Setting the clock | Hotpoint osx 1036s nd cx

Start-up and use

To deactivate the lock, press and hold the	icon again
To deactivate the lock, press and hold the	icon again	GB
for at least 2 seconds.		GB

pull (2).

WARNING! The oven is provided with a stop system to extract the racks and prevent them from coming out of the oven (1).

As shown in the drawing, to extract them completely, simply lift the racks, holding them on the front part, and

Setting the clock

!The clock can only be set when the oven is switched off. If

the oven is in standby mode, pressing the icon once will display the current time setting. Press it again to set the time.

After connection to the power supply network or after

a blackout, the	icon and the digits on the TIME display
will flash for 10 seconds.
To set the clock:

!The first time you use your appliance, heat the empty oven with its door closed at its maximum temperature for at least half an hour. Make sure that the room is well ventilated before switching the oven off and opening the oven door. The appliance may emit a slightly unpleasant odour caused by protective substances used during the manufacturing process burning away.

!To make the setting process easier, press and hold the “ ” or “ ” icons: this will increase the scrolling speed of the numbers on the display.

!Each setting will automatically be stored in the appliance memory after 10 seconds.

!During operation, we recommend the removal of any crockery or delicate foodstuffs from the cavities not being used.

!Once cooking has begun, before the DIVIDER is removed, the oven must be switched off using theicon.

!Every time the oven is switched on it is set to the CREATION cooking mode.

!The touch controls cannot be activated if the user is wearing gloves.

!In order to optimise the cooking performance, when starting the selected function, product settings will be applied that could cause a delayed start of the fan and heating elements.

Some models are equipped with a system of hinges which allows the door to close slowly, without the user having to follow the movement through with his/her hand. To use the system correctly, before closing the door:

•Open the door fully.

•Do not force the closing movement manually.

Control panel lock

!The control panel can be locked while the oven is off, once cooking has started or finished and during programming.

To lock the oven controls, press and hold the icon for at least 2 seconds. A buzzer will sound and the display

shows the key symbol “n—O”. The	icon will light up to
indicate lock activation.

1. Press the

icon.

2.Adjust the hour value using the “ ” and “ ” icons.

3.Once you have reached the correct hour value, press

the icon.

4. Repeat the above process to set the minutes.

If a blackout occurs, it will be necessary to reset the clock.

If the icon flashes on the display, this indicates that the clock has not been set correctly.

Setting the minute minder

!The minute minder may be set regardless of whether the oven is switched on or off. It does not switch the oven on or off.

When the set time has elapsed, the timer emits a buzzer that will automatically stop after 30 seconds or when any active icon on the control panel is pressed.

To adjust the timer proceed as follows:

1. Press icon

2.Set the desired time using “ ” and “ ” icons.

3.Once you have reached the desired value, press the

icon again.

The lit	symbol will remind you that the minute minder
is on.
To cancel the minute minder, press the		icon and use
the knob to set the time to 00:00. Press the		icon again.
The	icon will switch off to indicate that the minute minder

has been disabled.

Cooling ventilation

In order to cool down the external temperature of the oven, a cooling fan blows a stream of air between the control panel and the oven door, as well as towards the bottom of the oven door. At the beginning of the FAST CLEAN mode, the cooling fan operates at low speed.

!Once the cooking has been completed, the cooling fan remains on until the oven has cooled down sufficiently.

Oven light

The light comes on when the oven door is opened or when a cooking mode starts.

The	button can be used to switch on the light at any time.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24