GB Installation
!Please keep this instruction booklet in a safe place for future reference. If the appliance is sold, given away or moved, please make sure the booklet is also passed on to the new owners so that they may benefit from the advice contained within it.
!Please read this instruction manual carefully: it contains important information concerning the safe operation, installation and maintenance of the appliance.
Positioning
!Do not let children play with the packaging material; it should be disposed of in accordance with local separated waste collection standards (see Precautions and tips).
!The appliance must be installed by a qualified professional in accordance with the instructions provided. Incorrect installation may damage property or cause harm to people or animals.
Built-in appliances
Use an appropriate cabinet to ensure that the appliance operates properly:
•The panels adjacent to the oven must be made of
•Cabinets with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100°C.
•To install the oven under the counter (see diagram) or in a kitchen unit, the cabinet must have the following dimensions:
| . |
|
| mm |
|
mm. | 550 . |
|
min | mm. | |
. |
Centring and fixing
Secure the appliance to the cabinet:
•Open the oven door.
•Remove the 4 rubber plugs covering the fixing holes on the perimeter frame.
•Fix the oven to the cabinet using the 4 wood screws.
•Replace the rubber plugs.
!All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.
Electrical Connection
The electrical connection to the mains must be made on the appliance. The power voltage and frequency are as indicated on the rating plate.
!THIS APPLIANCE MUST BE EARTHED. Fitting the power supply cable
|
|
| mm |
| ||
| 20 |
| 45 |
| . | |
590 mm. |
|
| 560 | |||
570 mm. |
| mm | ||||
|
| |||||
|
|
| ||||
595 | mm. |
| . |
| mm | ||
|
| 550 | . |
|
| mm | |
|
|
| .* |
|
| 20,5 mm | |
|
| 22,5 |
|
!The appliance must not come into contact with electrical parts once it has been installed. The indications for consumption given on the data plate have been calculated for this type of installation.
Ventilation
To ensure adequate ventilation, the back panel of the cabinet must be removed. It is advisable to install the oven so that it rests on two strips of wood, or on a completely flat surface with an opening of at least 45 x 560 mm (see diagrams).
. | 45 | mm. |
mm |
| |
560 |
|
|
N |
N |
L |
L |
1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram)
.
2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws
.
Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked
(L)and the Yellow/Green wire to the terminal marked 
(see diagram). 3. Secure the cable by fastening the clamp screw.
4. Close the cover of the terminal board.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
4