How to Vacuum Package using FoodSaver® Canisters and Bottle Stoppers
1.Place the appliance on a flat, dry surface and plug the supply cord into a standard electrical outlet.
2.Canisters: place the item(s) to be vacuum packaged inside the canister. Place the lid on top of the canister*. See figure 1.
Figure 1
Bottle Stoppers: insert the Bottle Stopper into the neck of the bottle.
Leave at least 2.5cm between the contents and the rim. See figure 2.
3.Insert one end of the Accessory Hose into the Accessory Port on the appliance. Insert the other end of the hose into the lid of canister or bottle stopper.
4.Lock the latch on the side to the 'operate' position before vacuuming.
5.Press 'Canister' Button to begin vacuum process for either canisters or bottles, motor will run until vacuum process
is complete.
6.When light indicator turns off, gently twist and remove Accessory Hose from appliance and canister or bottle stopper.
How to Open the FoodSaver® Canister
To open, press and hold down the grey rubber button in the center of the lid. This will release the vacuum – a hissing sound can be heard as the air rushes in.
* FoodSaver® Canisters sold separately.
How to Remove the FoodSaver® Bottle Stopper
To remove, simply twist and pull up on the Bottle Stopper to release the vacuum.
IMPORTANT: Remember to remove the Accessory Hose from the Accessory Port on the appliance before you vacuum package in FoodSaver® Bags.
DO NOT STORE CANISTER IN THE FREEZER.
Figure 2
13