Sunbeam PC3610, PC3600, PC4700 manual Setting the clock, Setting the automatic operation

Page 8

Using your Aroma Coffee™ 12 (contined)

How to use the Electronic Programming (PC4700 model only)

Setting the clock

1.Plug the coffee maker into a 230-240 volt AC power outlet and switch power on, the numbers on the LCD will flash until you set time of day.

2.To set time of day press H (hour) button to set the current hour. AM or PM will be displayed.

3.Press M (minutes) button until you reach the current time.

Setting the automatic operation

After you have set the time, you may now set the Automatic Operation.

1.Make sure the clock is set for the correct time of day.

2.Fill coffee maker with the desired amount of water and coffee. Place the carafe into position on the warming plate.

3.While holding down the PROGRAM button, press the H and M buttons until the desired brewing time is reached.

4.Once the desired brewing time has been reached, release the PROGRAM button and the current time will be displayed on the LCD.

5.Press the AUTO button to set the coffee maker to come on automatically at the desired time.

6.An illuminated small green light to the left of the AUTO button indicates that the brew cycle will begin at the set time.

7.Press the AUTO button again to cancel the automatic brew.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Aroma Coffee Contents Important instructions retain for future useSunbeam’s Safety Precautions Permanent mesh filter Anti-drip valveGlass carafe with hinged lid Thermostatically controlled warming plate Coffee strength selector Water gauge Fast brewing Electronic programming PC4700 onlyBrewing coffee Using your Aroma CoffeeBefore first use Paper filters Thermostatically controlled non-stick warming plateFilter holder Setting the clock Setting the automatic operationCare and cleaning Descaling your coffee makerPage New Zealand Month Replacement GuaranteeAustralia Need help with your appliance?
Top Page Image Contents