Fitting/using the tools on your MultiProcessor continued
5.Plug the power cord into a
6.Select the required speed.
7.When processing is complete, remove the blade holding disc and spindle from the processing bowl before removing the processed food.
Citrus Juicer
Note: This attachment is only available with the MultiProcessor Plus (LC6950).
1.Fit the processor bowl as detailed previously in Figures 2 & 3.
2.Fit the citrus juicer bowl into the food processing bowl, see Figure 14.
Fig 14
3.Rotate
4.Insert the juicing cone into the centre of the citrus juicer bowl; the drive shaft should be inside the central column of the bowl, see Figure 16.
Fig 16
5.Plug the power cord into a
6.Place fruit on citrus cone and hold with a cupped hand and turn speed control to speed 1.
Note: Always operate the juicer at minimum speed only.
Blender
Note: This feature is only available with the MultiProcessor Plus (LC6950).
1.Remove the safety cover from the food processor body. Simply twist the safety cover clockwise and remove, see Figure 17.
LC6950
Pictured
Fig 15
Fig 17
14