Descaling solution

Descaling

Scale is a surface build up of minerals that naturally occur over time in all appliances that are involved with the heating of water. Therefore the espresso machine will require occasional descaling. It is recommended that the espresso machine is descaled every 4-6 months, this will vary depending on the frequency of use.

Use any of the following when descaling the espresso machine:

 Sunbeam Espresso Machine Descaling Tablets

 Sunbeam Liquid Descaler, or  Vinegar Solution.

Descaling the espresso machine

Note: Ensure the espresso machine is turned off and the power cord is unplugged.

1.Remove the water reservoir and rinse clean. Depending on the descaling solution being used use one of the following:

A. Sunbeam Espresso Machine Descaling Tablets

Fill the water reservoir with 1 litre of warm water and place a descaling tablet into the reservoir. Once the tablet has dissolved replace the reservoir, this takes about 5-7 minutes.

B. Sunbeam Liquid Descaler

Fill the water reservoir with approximately

1.5litres of water, add 1 capful of Sunbeam Liquid Descaler and replace the reservoir.

C.Vinegar solution

Fill the water reservoir with approximately

1.5litres of warm water, add 3 tablespoons of vinegar and replace the reservoir.

2.Should the filter handle be attached to the group head remove it, rinse thoroughly under running water and set aside.

3.Using a screwdriver unscrew the brewing filter/shower screen from the underside of the group head.

4.Remove and set aside the filter/screen, washer and screw in a safe place.

Important: Be careful not to lose the filter/ screen, washer and screw once you have disassembled the group head.

5.Using a small brush scrub in and around the area at the brewing head, removing all coffee granules.

6.Place a sufficiently large container under the group head.

7.Insert the power cord into a 230-240V AC power outlet and switch the power ‘ON’.

Press the power button once to turn the espresso machine on.

Note: Remember if 'READY' is not displayed on the LCD the espresso machine is adjusting the temperature of the heating system.

Once the espresso machine is heated to the correct temperature, the temperature indicator line on the LCD will stop flashing and and 'READY' will be displayed, this indicates that the espresso machine is heated and ready to use.

8.Turn the operating dial anticlockwise to the

espresso setting and allow half the solution to cycle through the group head.

Important: Do not run descaling solution through the steam wand.

Note: Depending on the size of the container under the group head on occasion this may need to be emptied throughout this process.

9.After half the solution has cycled through turn the operating dial to the off position

to stop the flow and then press the power button to turn the machine off.

EM5600 specifications

The Sunbeam EM5600 is a state-of-the-art espresso machine designed for both coffee enthusiasts and professional baristas. This versatile machine combines advanced technology with user-friendly features to ensure a top-notch coffee brewing experience.

One of the defining characteristics of the Sunbeam EM5600 is its powerful 15-bar pressure system. This high level of pressure is crucial for extracting the rich flavors and aromas from coffee grounds, allowing users to create café-quality espresso right at home. The machine’s stainless steel boilers ensure optimal temperature stability, which is vital for consistent brewing results.

Additionally, the EM5600 is equipped with a thermal block heating system, allowing for quick heat-up times so that users can start brewing their favorite coffee without long wait times. This feature is a major plus for those with busy mornings, as it allows for swift preparation and minimal downtime.

The EM5600 also boasts a user-friendly interface with a backlit LCD display that provides clear guidance on the brewing process. Intuitive control knobs allow users to easily select brewing options, ensuring that both novice and seasoned baristas can operate the machine with ease. The programmable settings let users customize shot durations, adjusting the strength and flavor profile to their exact preferences.

For milk-based drinks, the Sunbeam EM5600 features a high-quality steam wand. This wand delivers powerful steam pressure, making it easy to froth and texture milk to create lattes, cappuccinos, or flat whites. The design of the steam wand promotes ease of movement, enabling baristas to create beautiful microfoam art with precision.

The EM5600's compact design and sleek finish make it an attractive addition to any kitchen countertop. It includes a removable water tank for easy refilling and a drip tray designed to catch any spills, ensuring a cleaner coffee-making process.

Overall, the Sunbeam EM5600 combines innovative technology with practical features to provide coffee lovers with an exceptional brewing experience. Whether you're interested in crafting a rich espresso or a creamy cappuccino, this machine offers the versatility and performance needed to satisfy diverse coffee cravings.