Guide to milk texturing

Milk texturing is the steaming of milk. The steam does two things, firstly it heats the milk and secondly the steam mixes air with the milk to form an ‘emulsion’ of tiny bubbles that gives a silky velvet texture. Similar to making an espresso, perfecting the art of milk texturing takes time and practice.

Tip: Remember espresso is the foundation for all café style drinks and the milk is the variable.

Before starting to prepare for milk texturing, ensure the espresso machine is in steam mode, so the red light on the power button and orange light on the steam button are illuninated.

Note: Should the espresso machine not be in steam mode, so the orange light on the steam button is not on, the coffee maker needs to press the steam button to activate the steam mode.

1.Determine how much milk is needed based on the number of cups being made or the size of the texturing jug.

Tip: Keep in mind that the volume of milk will increase or ’stretch’ during the texturing.

2.Pour cold refrigerated milk into a stainless steel jug, between ½ to ²/³ full.

Tip: Store the stainless steel jug in the fridge so that it is well chilled. Also be sure not to rinse the jug with warm water before use.

3.Purge the steam wand of any water. With the steam wand positioned over the drip tray activate the steam function by turning the operating dial to the steam setting (25). Once any water has been purged close the steam by turning the operating dial to the off position (26).

4.Swing the steam wand to the side of the espresso machine (27).

5.Place the steam wand into the milk so that the nozzle is about a centimetre

below the surface and activate the steam function by turning the operating dial to the setting (28).

6.Angle the jug so that the steam wand is resting on the spout of the jug and lower the jug until the tip of the steam nozzle is just below the surface of the milk. This will start to create a whirlpool action in the milk (29).

Note: Do not allow the steam to spurt unevenly or it will create aerated froth/large bubbles. If this is happening raise the jug so that the steam nozzle is lowered deeper into the milk. Remember the ideal consistency is a silky velvet texture.

7.As the steam heats and textures the milk, the level of the milk in the jug will begin to rise. As this happens follow the level of the milk by lowering the jug, always keeping the tip of the steam nozzle just below the surface.

8.Once the foam is created raise the jug until the steam nozzle is in the centre of the milk (30).

Tip: The amount of foam required will vary depending on the drinks being made, for example a cappuccino requires more foam than a flat white.

9.Close the steam immediately when the milk is heated to between 60-65°C by turning the operating dial to the off position (31).

Tip: If you don’t have a thermometer a good indication that the correct temperature has been reached is when you are unable to leave the palm of your hand against the side of the jug for more than 3 seconds.

Important: Do not boil the milk.

10.Remove the jug, immediately wipe the steam nozzle and wand with a clean damp cloth (32) and purge a small amount of steam.

EM5600 specifications

The Sunbeam EM5600 is a state-of-the-art espresso machine designed for both coffee enthusiasts and professional baristas. This versatile machine combines advanced technology with user-friendly features to ensure a top-notch coffee brewing experience.

One of the defining characteristics of the Sunbeam EM5600 is its powerful 15-bar pressure system. This high level of pressure is crucial for extracting the rich flavors and aromas from coffee grounds, allowing users to create café-quality espresso right at home. The machine’s stainless steel boilers ensure optimal temperature stability, which is vital for consistent brewing results.

Additionally, the EM5600 is equipped with a thermal block heating system, allowing for quick heat-up times so that users can start brewing their favorite coffee without long wait times. This feature is a major plus for those with busy mornings, as it allows for swift preparation and minimal downtime.

The EM5600 also boasts a user-friendly interface with a backlit LCD display that provides clear guidance on the brewing process. Intuitive control knobs allow users to easily select brewing options, ensuring that both novice and seasoned baristas can operate the machine with ease. The programmable settings let users customize shot durations, adjusting the strength and flavor profile to their exact preferences.

For milk-based drinks, the Sunbeam EM5600 features a high-quality steam wand. This wand delivers powerful steam pressure, making it easy to froth and texture milk to create lattes, cappuccinos, or flat whites. The design of the steam wand promotes ease of movement, enabling baristas to create beautiful microfoam art with precision.

The EM5600's compact design and sleek finish make it an attractive addition to any kitchen countertop. It includes a removable water tank for easy refilling and a drip tray designed to catch any spills, ensuring a cleaner coffee-making process.

Overall, the Sunbeam EM5600 combines innovative technology with practical features to provide coffee lovers with an exceptional brewing experience. Whether you're interested in crafting a rich espresso or a creamy cappuccino, this machine offers the versatility and performance needed to satisfy diverse coffee cravings.