Care and Cleaning, Drip tray and grill

Care and Cleaning

The coffee making process involves extracting oils out of coffee grinds to make espresso coffee. Deposits of these oils build up over time and affect the taste of the coffee and operation of the espresso machine.

Regular cleaning to remove these oils is essential and will maintain the quality of the coffee the espresso machine produces and result in less maintenance being required. This is easy to do by following a few quick and easy cleaning steps after each coffee making session;

Cycle water through the group head,

Purge steam through the steam wand,

Wipe the steam wand clean with a damp cloth immediately after use,

Remove the filter basket from the filter handle and clean away any old coffee oils, and

Empty the drip tray and rinse.

Important: Never wash any of the espresso machine parts or accessories in the dishwasher.

Drip tray and grill

Remove the grill and drip tray at regular intervals to empty (36) (37). Clean with water and a little non-abrasive washing up liquid, rinse and dry.

Over time it is normal for the inside of the drip tray to be stained by the oils in the coffee.

Note: Ensure that when you are replacing the drip tray and grill that the plastic lining is in position (38).

Group head, filter handle & filter baskets

The filter baskets and filter handle should be rinsed with warm water after each use and then dried thoroughly.

To clean the group head of any old coffee grinds cycle water through and wipe the group head and around the inside rim with a damp cloth.

Should the holes in the filter baskets become clogged with coffee granules use a fine bristled brush to remove them.

Important: Should the filter remain blocked after normal cleaning, supplied with your espresso machine is a cleaning pin. The cleaning pin for the filter is the GREY pin located under the base of the water reservoir (39)(40). With the cleaning pin insert it into the single hole in the base of the filter (41).

Group head rubber seal

The group head seal is located on the underside of the group head and creates a seal against the filter handle during the espresso pour.

Note: During long periods of non-use we recommend that the filter handle not be left attached to the group head as this will reduce the life of the seal.

Over time the seal will lose its elasticity and require replacement, depending on use usually every 12 months. Signs that the seal is deteriorating are when the filter handle cannot create the necessary seal and steam escapes from around the group head during the espresso pour.

Note: Contact Sunbeam on 1800 025 059 should you think that the group head seal needs replacing.

Cup warming plate and exterior

Wipe over the unit with a damp cloth and wipe dry. Do not use abrasives or metal scourers as these will scratch the exterior surface.

EM5600 specifications

The Sunbeam EM5600 is a state-of-the-art espresso machine designed for both coffee enthusiasts and professional baristas. This versatile machine combines advanced technology with user-friendly features to ensure a top-notch coffee brewing experience.

One of the defining characteristics of the Sunbeam EM5600 is its powerful 15-bar pressure system. This high level of pressure is crucial for extracting the rich flavors and aromas from coffee grounds, allowing users to create café-quality espresso right at home. The machine’s stainless steel boilers ensure optimal temperature stability, which is vital for consistent brewing results.

Additionally, the EM5600 is equipped with a thermal block heating system, allowing for quick heat-up times so that users can start brewing their favorite coffee without long wait times. This feature is a major plus for those with busy mornings, as it allows for swift preparation and minimal downtime.

The EM5600 also boasts a user-friendly interface with a backlit LCD display that provides clear guidance on the brewing process. Intuitive control knobs allow users to easily select brewing options, ensuring that both novice and seasoned baristas can operate the machine with ease. The programmable settings let users customize shot durations, adjusting the strength and flavor profile to their exact preferences.

For milk-based drinks, the Sunbeam EM5600 features a high-quality steam wand. This wand delivers powerful steam pressure, making it easy to froth and texture milk to create lattes, cappuccinos, or flat whites. The design of the steam wand promotes ease of movement, enabling baristas to create beautiful microfoam art with precision.

The EM5600's compact design and sleek finish make it an attractive addition to any kitchen countertop. It includes a removable water tank for easy refilling and a drip tray designed to catch any spills, ensuring a cleaner coffee-making process.

Overall, the Sunbeam EM5600 combines innovative technology with practical features to provide coffee lovers with an exceptional brewing experience. Whether you're interested in crafting a rich espresso or a creamy cappuccino, this machine offers the versatility and performance needed to satisfy diverse coffee cravings.