Connect Vent System

2.Level the blower housing with leveling screws in mounting hooks, using a level across bottom of blower housing.

3.Remove the metal grease filter and secure the blower housing with one screw in the bottom hole located in the rear of the blower.

A. Rear of blower housing

B. Bottom 5 x 35 screw hole

Vented Installations Only

1.Fit vent system over transition piece.

2.Seal connection with clamps.

Make Electrical Connection

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Disconnect power.

2.Remove terminal box cover.

3.Remove the knockout.

Non-vented (recirculating) Installation

1.Assemble the 3 parts of the deflector with 2 - 3.5 x 6.5 screws provided. The assembled deflector should be sized to fit the width of the vent cover bracket installed earlier.

A. Vent cover bracket width

B.Deflector

C.3.5 x 6.5 mm screws

2.Connect the deflector to the vent cover bracket using 4 - 3.5 x 6.5 screws provided.

A. Vent cover bracket

B. 3.5 x 6.5 mm screws

3.Measure length of 8" (20.3 cm) vent needed to connect the transition to the deflector.

NOTE: Vent should fit up inside deflector a minimum of 1" (2.5 cm).

4.Install vent between the transition and the deflector.

5.Seal all connections with clamps.

A.Knockout

B.Terminal box cover

4.Install the UL listed or CSA approved strain relief.

F E D

A. ½" conduit

B. Terminal box cover

C. UL listed or CSA approved strain relief

D. Green (or bare) wire connected to yellow-green wire E. White wires

F. Black wires

W10018010 specifications

The Whirlpool W10018010 is a state-of-the-art refrigerator water filter designed to enhance the quality of drinking water by reducing harmful contaminants. It features an advanced filtration system that not only improves taste but also ensures safety for you and your family. This water filter is compatible with a wide range of Whirlpool refrigerators, making it a versatile choice for many households.

One of the main features of the W10018010 is its ability to reduce various impurities commonly found in tap water. It effectively removes contaminants such as lead, chlorine, and sediment, ensuring that the water you drink is clean and refreshing. This filter boasts a comprehensive 6-month lifespan, allowing for long-term usage before needing a replacement. Its easy installation process means you can replace the filter without any professional help, maintaining the convenience of access to filtered water.

Technologically, the W10018010 incorporates Whirlpools's innovative filtration technology, which utilizes activated carbon to capture and absorb pollutants. This environmental-friendly solution helps provide better-tasting water while significantly reducing plastic waste, as it minimizes the need for bottled water. The filter is also NSF certified, guaranteeing that it meets stringent safety and performance standards.

Durability is another hallmark of the W10018010. Constructed with high-quality materials, this filter ensures longevity and effectiveness, making it a smart investment for anyone looking to improve their home's water quality. Additionally, the filter design facilitates optimal water flow, ensuring that you can enjoy refreshing water without compromising on pressure.

The W10018010 is designed with user-friendliness in mind. It features an easy-to-read installation guide and clear labeling, allowing users of all skill levels to install it effortlessly. Overall, the Whirlpool W10018010 water filter represents a combination of advanced technology, user-centric design, and essential purification capabilities. With its focus on both safety and convenience, it stands as an ideal choice for families looking to improve their hydration habits while ensuring the health and well-being of their loved ones. By choosing this filter, you invest not only in taste but also in the peace of mind that comes with drinking clean, safe water.